Hydor Seltz D 6000 and 12000 – Preview

by | Mar 20, 2019 | Equipment | 0 comments

We finally have a sample of the new Hydor Seltz D return pump. It is an AC and adjustable pump; let’s see its characteristics in our preview.

The new Hydor Seltz D was presented by Hydor at Interzoo 2018 (article). It is an alternating current pump, and is also adjustable. This feature makes it similar to the Rossmont Riser (article), but less expensive and so much more interesting. The controller is included in the package, so the pump is not only very easy to set up but also ready to work in the aquarium.

The pump is very heavy, and is black and dark red; classic Hydor. We like this rugged look. The cover of the rotor is linked to the body with four screws that make the entire block very solid. Included in the package are hoses of different sizes to gather and push the water. The pumps are lifted up from the support plane by 4 little rubber feet in a shaped plate located under the central body.


Thanks to its multiple connections, the pump can be used both inside and outside the sump. Below we can see the standard equipment of the hose connections for the Hydor Seltz D 6000, 3 hoses and the ferrules to screw them.

Technical specs for Seltz D 6000 and Seltz D 12000

Seltz D 6000
Seltz D 12000
Flow rate: 6,000 l/h 12,000 l/h
Consumption: 60 watt 90 watt
Hydraulic head: 4.20 m 4.8 m
Width: 19.5 cm 21 cm
Depth: 8.9 cm 8.9 cm
Height: 11.9 cm (just the body) 11.9 cm
Cable length: 2 m 2 m

The package comes with a convenient handle for transport and includes the technical data of all the three pumps of the Seltz D series. In addition to the two listed here, there is also the Seltz D 9000.

The reference value of the Hydor Seltz D 6000 is 12,600 l*m/s, while the 12000 is 28,800 l*m/s.

The rotor is very well built, similar to the Ecotech Marine Vectra (article) and the Waveline DC 6000 (article).

Obviously the rotor of the two pumps have different lengths, that is the quantity of magnetic material of the rotor itself.

The rotor of the Hydor Seltz D 12000, that you can see on the right, has more or less normal dimensions for a pumps with its set of characteristics, while the rotor of the Hydor Seltz D 6000, on the left, seems particularly short in comparison.

The Hydor Seltz D pumps are commanded by a physical controller. The controller is in line with the pump, and works with two simple buttons + and -, that allow one to adjust the rate of the pump with immediate feedback. You can also pause the pump for 5 minutes with a specific button.

The comparison with other pumps

Let’s see the comparison between the two Hydor Seltz D pumps with the other pumps that we’ve reviewed in the past months, both direct and alternating current. The pumps are listed by their reference value.

Reference valueFlow rateHydraulic headConsumptionPriceLiters x €Liters x wAnnual cost
Eheim 1260 4,440 2,400 l/h 3.7 m 65 w 137,90 € 17.4 36.9 159 €
Rossmont Riser 3200
 4,640 3,200 l/h 2.9 m 52 w 114,90 € (239,85 €) 27.9 (13.3) 61.5 127 €
tunze 1073.050 5,850 3,000 l/h 3.9 m 43 w 180 € 16.7 69.8 101 €
Ecotech Marine Vectra S1
 9,275 5,300 l/h 3.5 m 55 w 299 € 17.7 96 135 €
Corallinea Big World BQ5000-L 12,500 5,000 l/h 5 m 80 w 120 € 41.7 62.5 189 €
Hydor Seltz D 6000 12,600 6,000 l/h 4.2 m 60 w 125 € 48 100 142 €
Waveline DC6000
 13,200 6,000 l/h 4.4 m 55 w 283 € 21.2 109 135 €
sicce Syncra SDC 7.0 17,500 7,000 l/h 5 m 65 w 399 € 17.5 107.7 189 €
Ecotech Marine Vectra M1 24,375 7,500 l/h 6.5 m 80 w 419 € 17.9 93.8 189 €
Hydor Seltz D 1200028,800 12,000 l/h 4.8 m 90 w 180 € 67 133 213 €
Corallinea Pulsa 12000
 30,000 12,000 l/h 5 m 100 w 193 € 62.2 120 237 €
Ecotech Marine Vectra L1 37,375 11,500 l/h 6.5 m 130 w 539 € 21.33 88.5 307 €

As you can see the economical efficiency is very high, with the highest results in our ranking (on paper). Moreover the Hydor Seltz D 12000 has the record of 67 liters per euro. Even from the point of view of the “proper” efficiency, which is liters per watt, they continue to stay at the top of the category, with the 12000 having an enviable record of 133 liters per watt. We’re looking forward to testing the two pumps in the next few days, in order to see if they will be able to maintain their promises.

Finally, take a look at the behavior of the head-rate of the three Hydor Seltz D below:

Pompe di risalita Hydor seltz D - grafici a confronto

The curve is downward, as expected, and wider than if we were to connect the two extremities, in particular for the 12000 l/h. This is the behavior that every pump should have.

The Hydor Seltz D 6000 is sold for 124,90 euro while the 12000 is 179,90 euro. A very low price, which makes this an option for every aquarist. Two controllable and powerful pumps, with optimal performances.

We’ll be able to test their performances soon. Moreover we’re going to set them up in an aquarium to see their response to real conditions.

[Translated by Agnese Poggi]

  • Danilo Ronchi, aka DaniReef lives in Italy where he is hydraulic engineer, but starting from his love for reef aquarium and photography, he began to write about marine aquariums from 2006 and now he's published his first book "Marine Aquarium". From 2007 Danilo writes on his blog danireef.com where publishes articles, pictures, product reviews, aquariums coverage, reportage and history of his tank. Now he's happy to be part of Reefs.com

    View all posts

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *