EVOLUTION IM20 - May Day upgrade alert. IM30L ext

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
For the sump you can do 20 long diy sump kit from fijucube and for the lighting if i were you I'll go with 2 hydra 32 with ai rail kit

Sent from my SM-N975U using Tapatalk
As far as lighting, I may just continue using my current light which is a 24" fixture but definitely enough PAR with ATI blue + with the LEDs sitting at 12" above water line.

When ready....
Ive had AI hydras before and prefer T5/led mixture if I use them. Which would put me around 700+ range.

I seen good reviews on the Kessil AP700 alone.

Wondering if a radion g5 is better to go with since they are retailed at the same range.
 

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
Not 100% sure what I have planned for the IM20. I may turn it into my frag tank or sell it and buy a frag tank with overflow preferred but we'll see. Someone already looking to buy full setup so I'll let you know how it ends up.
 

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
So there was a feedback on either MarineDepot or BRS that stated the Skimz Sumpro UP22 fit the APS NUVO stand without modification. It was a better option than a BASHEA sump that was thrown out there as another option.

Sadly.....The Skimz Sumpro does NOT fit without modification. It is long by maybe 5mm~. I didn't want to force the fit especially since I just paid 300$ for it. Fcuk that. I lined it up against the board that sits at the bottom and confirmed that it is just long and the board JUST fits.

Now I have to build a bottom to fit the space but the good news is I do have additional 2 x 4 lumber from other home projects that I can use. So no additional cost but a pain that the stand is so limited and no good sump options for the stand. If the stand allowed more internal space for a sump with no modifications, it would be a nice clean option while on sale. Pretty pricey but it is a nice option, light weight, aluminum so no rust, etc. So there are pluses but being a stand expected to house a sump and other reef equipment it isn't ideal.

I really wanted to make some type of water proofing possible with showerpan liner for extra peace of mind but I don't know if that is even a possibility with this stand.

Now, I just have to be extra careful and have a 100% fool proof plan.

Main concerns, skimmer overflowing, no external skimmer waste collector, no external equipment that can potentially leak, ensure no issues during power outages and no issues with ATO causing a huge leak.
 
Last edited:

Geraud

Member
Manhattan Reefs
Rating - 100%
48   0   0
Location
Manhattan
Thank you for detailling all the little things in your build, this is really what is useful about forums! Theory vs practice, and how to solve little problems we will encounter along the way.

On a side note, I hope more companies go the external route for their overflow. I am not a fan of bottom-drilled tanks and even less of the huge columns that go in the tanks: way more elegant to have an external overflow box, especially how small the internal sides have become.

All the best for your build!
 

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
Thank you. I wanted to go detailed with this thread because there was so little information out about the external 30L from IM.

I searched everywhere r2r, RC, etc. Very little info about this tank. Hope, this helps someone in the future.


So the good news, I used 2x3 cut to 11.5" and placed them as support under the bottom provided board with rubber furniture feet to keep the feet off the ground.

This brought the bottom up almost flush to the bottom aluminum bars for the stand and able to seat my sump perfectly.

Pictures will be taken sooner or later.

Tank wont be coming in until Monday. UPS Freight confirmed.

Still deciding on my piping route and controller setup. Debating if its better to setup my electronics in a separate cabinet or just modify the stand even more. **leaning towards a separate electronics box

We'll see!
 

Geraud

Member
Manhattan Reefs
Rating - 100%
48   0   0
Location
Manhattan
I am looking into their 40 EXT. I think these are all new models, hence the lack of reviews. What I am mostly curious about is the back: from the looks of it from the videos of the 2018 75 and 100 models, there is a glass pane in the back, with a U-shape cut at the top and then a black acrylic panel is glued to it, with the comb-like structure. Really curious about the details there.
 

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
Yeah, it looks like a false wall with the overflow teeth cut for surface skimming. I havent seen any reviews of any issues with it so not too worried about that.

More worried about shipping and tank coming in cracked. I believe there were other manufactures in the past who did external overflows and had multiple problems with shipping causing cracks at the external overflow box as a weaker point than a glass tank already is. Extra padding around that area would need real care to ensure it doesnt break.

I'll find out on Monday.

Otherwise, others have complained in particular about the placement of the overflow for the 30L.

Since I am doing something a little different than others with a TV wall mount. I dont care too much about where it is.
 

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
Still in process of setting up. Still need to put shower pan liner down before I am allowed to fill the tank.

Not done dry fitting PVC and making sure everything is set.

Then I can get water in and test before I swap everything over.

Waiting for remaining items to come in and will need to do my electrical cabinet in the future. Think I'll transfer everything and make that a future change.
 

Attachments

evoIX_Reefer

Well-known member
Rating - 100%
125   0   0
Looks like caused a bacterial bloom and waiting for that to clear up.

No casualties yet but my dragon soul torch didnt look too happy.

Not 100% happy with the setup.

Need to swap out the control valve with a gate valve for better control.

Just made my DIY NOPOX - 1 Part Vinegar : 1 Part Vodka + RO/DI to reduce concentration of alcohol content in the vodka.

So dosing 2 part and NOPOX.
Running Carbon in reactor and hoping to control PO4 with NOPOX but when needed for ease of use. Drop PO4 with phosguard in media bag.
 

Attachments

Last edited:
Top