Neptune Systems has been feverishly adding new accessories to their Apex controller over the last couple of years, and they’ve finally debuted their very own water pump. Called the WAV, this new system offers extreme water flow and it comes with a mountain of features and interesting selling points that could give some of the long established pumps a good run for their money. The pump is smaller than numerous other powerheads on the market, yet it cranks out over 3200 gallons per hour, all of which is under full Apex control. But we will hit more on that below. Like most pumps, the WAV attaches the wall of the aquarium via strong magnets, though these are are capable of handling tanks with glass or acrylic up to 3/4″ thick. The magnet mount also allows the WAV to vertically pivot +/- 20 degrees and rotate a full 360, letting the flow hit specific areas within the tank.In terms of controllability, the pump is built and designed to be used seamlessly with the Apex controller, and Neptune Systems even gave the WAV its own module, called the 1LINK. There are numerous flow settings through the controller, and the flow rates can be monitored through the Apex Fusion dashboard just like you would water temperature or pH. All in all, there are 8 pre-built flow programs (Constant, Mavericks, Lagoon, Pulse, Huntington, Rincon, Trestles, and Doheny), and users can program the pump to operate under any one of these modes at any time of the day. Neptune Systems WAV ModesIn addition to controlling the pumps, users will also be able to monitor each and every one that is plugged into the system.