How can I "glue" Live Rock to achieve a particular design?

[Paolissimo]

I am not sure if this is the right forum for the question.
I want to arrange my Live Rock in a particular way, T shaped or umbrella shaped. How can I achieve the design? How can I glue or drill the live rock from an established tank in order to achieve the design? I know some people use quickcrete to make their rock, but those need to be cured once they are build. My Liverock are in an established tank.
Thanks any tips is greatly appreciated.

 

[Treef]

epoxy might be better for rocks than glue, you can shape and mold the stuff

 

[Ninja]

Be very careful with epoxy and LR. It drove my skimmer crazy for nearly 2-3 weeks. I would turn off the skimmer for 48 hrs after I put the epoxy on. If possible- glue the LR out of the water and let it dry there.

 

[budddman]

They make reef epoxy, comes in a tube. You kneed it together and put it between your rocks. Short drying time. Or you can drill them and use nylon threaded rods and nuts. Google marco rock and there's a good bit of info on how to do this

Sent from my Droid using Reefs

 

[Paolissimo]

lr rock

Well since the rocks are on an existing tank, they have to put together fairly quickly. I don't want to let them dry and kill the bacteria. I will most likely drilled them and put pvc piping in there. I will look into marco rocks. Too late right now and falling asleep.
Thanks

 

[BILBO913]

you can drill the rock with a masonary drill bit and use a small diameter piece of pvc for the support