hole maker

[4angel]

I want to drill out a 4 1/2 in hole on the side of my DIY canopy. Dose anyone have a bit this size that I could borrow?

 

[bad coffee]

I've got an auger if you buy the bit. I've only got a 3" holesaw though.

BC

 

[FRY]

i have a 4 1/2 inch hole saw

 

[4angel]

Hay fry that would work can I borrow for a day?

 

[FRY]

yes you can do you have a 3/8 or 1/2 inch chuck for the hole saw

 

[4angel]

I have a universal drill bit chuck

[ June 14, 2004, 07:39 PM: Message edited by: 4angel ]

 

[FRY]

4angel ygm

 

[FRY]

angel
make sure you have a good hold on drill and just apply a little pressure on drill bit like hold back on drill when going down into the wood if you can before youy go all the way thur the hole stop and gofrom other side it will make a clean cut on both side take your time on returning drill and bit

frank

 

[4angel]

Thanks for all your help Frank. FYI Folks Frank is one of the nices people you could meet. I've seen the work that he has done on stands both conventional and bow front and its all first rate. Frank you should go into the stand building business. A million more thanks Frank.

 

[FRY]

your welcome any time i can help let me know

thanks frank