Faucet adapter for rodi

[DEL]

Hey guys. I have an awi rodi system. The new place I'm moving to has one of those slim and sleek faucets. The adapters that awi sells is too big for it. Is there any other way to plumb the unit other than through the top faucet? All advice appreciated.

 

[timberwolfny]

check out bulk reef supply they have a good selection for plumbing supplies for ro di

 

[SteveZ15]

use this onthe copper line clamp it and tie the inlet to this compression fitting

 

[JimmyR1rider]

If you don't mind installing a permanent way to use the system the saddle valve that Stevez posted works great.

 

[SteveZ15]

you can put this under the bathroom sink put the rodi in the tub when done close the valve disconnect hose from inut and coil the hose and store under the sink leave it attached to the valve and just disconnect from the rodi,it makes it easier if you cant leave permanent but easy to take on and off. Ihave faucet adpt and put unit in tub to prevent floods,but that way is easy as well.

 

[DEL]

Thanks for the advice guys. Nothing can be permanent and definitely can't have in the tub. I'll check BRS to see what's available. If you guys have pics of your plumbimg that would be greatly appreciated. Thanks

 

[SteveZ15]

I.put In Tub When Using Then Take Off And Put Away When Done It Prevents Floods In tub

 

[arnaldolex]

thats the way i do it know but you can also get a piece that you put on from the way part before it goes to the line its like a t very cheap you can get it in homedepot sorry dont know the name of it.

 

[SanmanReefer]

This is how mine is set up, hope this helps.

 

[SanmanReefer]

Check with a plumbing shop, they may carry it.

 

[Buckeye Field Supply]

I would avoid the self piercing saddle shown above for a number of reason, especially if you can't make any permanant changes to the plumbing.

Two options are popular with customers in apartments: faucet adapter kit, and inline undersing shut off supply valve



Russ