Anyone know someone who can fix a AI sol blue

[duke62]

One of my fixtures is giving me a little trouble and have no idea what it could be. Since it's 3 years old the warranty is up plus don't feel like waiting a month for them to return it to me. It's working but every once in awhile the light fixture will go completely out and I have to unplug it and plug it back in to re start it. Don't think it's a major fix but need it repaired.

 

[BioMan]

even though I've never owned one of those, if your cutting off the power like that to get it working your essentially "rebooting" the device...does it have a timer?

 

[duke62]

I have 4 fixtures all hooked to the same controller . One day it was real dim and lights were blinking so don't know if it's that

 

[BioMan]

try reading this
http://www.bayoureefkeeping.com/topic/6591-ai-sol-led-problem/

 

[Jhoehlein]

AI units can be a little buggy, at least you know it's not the power supply. It could be the fan in the unit isn't working well, the lights will shut off automatically if they overheat. Check to see if the fan is running, it could just need a good cleaning.

 

[duke62]

Yeah maybe the board is going who knows. Could be that or something else. His light didn't work again it was fried.

 

[duke62]

I just cleaned the fan and when I checked it was running after the light went back on

 

[saltwaterinbrooklyn]

I had that issue when they first came out and I went to ai's website and re flashed the update to the controller and it never happened again.

 

[duke62]

I was wrong fan is not working. I have a extra fan anyone know how to change it?

 

[MO~IDOL]

I was wrong fan is not working. I have a extra fan anyone know how to change it?

Hey Dude is been long time! I had swap few fans before, honestly getting the 4 screws off the fixture is harder than to swap the fans...lol you need a Hex or Torx tool for the screws. once you got the case open just unplug the fan.

 

[Ponyboy]

Where did u get fan from I need one also

 

[duke62]

I have a spare fixture with bad royal blue bulbs

 

[duke62]

Ok wasn't to hard. The hardest part was getting the glue out of the hole that holds the wire in. Split my finger open

 

[MO~IDOL]

Where did u get fan from I need one also

http://shop.aquaillumination.com/

 

[MO~IDOL]

Ok wasn't to hard. The hardest part was getting the glue out of the hole that holds the wire in. Split my finger open

heatgun, hair dryer not your fingers...lol hope you got it fix.