QD 40 Wet-side On MP-40 Dry side ?

[jackson6745]

Just curious if any of you are still running the older mp-40 motor and controller with a new style QD wet-side. If so, is there a noticeable difference in noise or flow from the older wet-side? I know what ecotech mfg says, just want to hear real life results. Thanks

 

[kres1024]

I'm running it like that ...but not gonna tell you what the results are ...lmfao

 

[Kworker]

I'm running two that way, newer wet side runs smoother.

 

[jackson6745]

I'm running it like that ...but not gonna tell you what the results are ...lmfao

Ghey:arg:

 

[jackson6745]

I'm running two that way, newer wet side runs smoother.

Thanks. More noticeable flow?

 

[kres1024]

Ghey:arg:

Haha I know u are but what am I ?
Lmfao

 

[jackson6745]

 

[Kworker]

Thanks. More noticeable flow?

They seem to put out better flow. A lot more quiet as well.

 

[jackson6745]

They seem to put out better flow. A lot more quiet as well.

Thanks. I appreciate the info.

 

[Kworker]

Thanks. I appreciate the info.

Anytime

 

[reefer4eva]

hey Rich I upgraded all 3 mp40's I have (all drivers,all wetsides)besides the smoother running of the dryside and the sleek looking wetside I have to say even when you crank them to max they are 100% quieter and I have noticed a wider flow with the new wetsides..probably due to the new design of it.the wetside is a lot easier to take apart for cleaning purposes..its the same design as the mp10 wetside.if your planning on upgrading yours I highly recommend upgrading the driver also

 

[Kworker]

hey Rich I upgraded all 3 mp40's I have (all drivers,all wetsides)besides the smoother running of the dryside and the sleek looking wetside I have to say even when you crank them to max they are 100% quieter and I have noticed a wider flow with the new wetsides..probably due to the new design of it.the wetside is a lot easier to take apart for cleaning purposes..its the same design as the mp10 wetside.if your planning on upgrading yours I highly recommend upgrading the driver also

The only downside I've found besides all the positives you listed was it seems the protective cage for the wet side comes off on its own a little easier. Just my experience thus far. Only happened a few times though.

 

[lnevo]

Definitely a bit more quiet. I started with the drivers which were insanely quiet compared to the older ones. Later I changed the wetside as one of my wetsides got completely jammed up. I still have the older dry sides, but they're supposedly the least of the noise contributors. You supposedly do need the newer dry sides for the increased flow.

 

[jcs11236]

The only downside I've found besides all the positives you listed was it seems the protective cage for the wet side comes off on its own a little easier. Just my experience thus far. Only happened a few times though.

I also have both the upgraded wet side and driver. I personally feel that the driver is what makes it more quiet. I ran my old wet side on the new driver and it was way more quiet.

I agree with kworker. I personally find the new wet side to be cheap and flimsy. The cage slips right off easily. I actually already snapped 2 of front cage sticks. They are so delicate compared to old one. And I find that the new wet side and dry side don't stick to glass as firm as old wet and dry side.
Just my .02

 

[jackson6745]

Thanks for the advice guys. I ordered new wetsides and drivers. My wetsides were damaged anyway so.....

 

[Kworker]

I agree with kworker. I personally find the new wet side to be cheap and flimsy. The cage slips right off easily. I actually already snapped 2 of front cage sticks. They are so delicate compared to old one. And I find that the new wet side and dry side don't stick to glass as firm as old wet and dry side.
Just my .02

I like the "style" better as they look nicer.. but do seem to be lower grade in plastic for sure.

 

[jackson6745]

WOW what a difference!!! With the new driver and wetside these pumps are silent. I can't even tell if they're pulsing or in feed mode. I can't really tell if it's more flow or not.
IMG_6078 by rich colombo, on Flickr

 

[jackson6745]

Question, what the heck to I do with the old drivers?

 

[lnevo]

It's awesome right. The dry sides run cooler too IMO and don't slip as much as they used to (even when I was using the old wet sides)

 

[reefer4eva]

Question, what the heck to I do with the old drivers?

Lol..since so many people been upgrading the drivers you see them for sale everywhere..not sure if they sell or not.