Recent content by drmartinmartin

I just took a plastic coat hanger and cut it so it looks like a J and put it in my coradless drill and mix untill the next bucket is full, and then I do a water change.Done this for three years now with no problems. 8)

Yes I have a L.J pump for the reactor, I am feeding the reactor with a mag 7. I have about 50ml a min in to the sump with a PH 6.7-6.5. You have said a couple of times that, . To me that means the media is in continuous movement in the reactor, and I don't have enough feed PSI to the reactor to...

You don't need a valve on the circulation pump...the media will slow it down. You want the reactor stirring itself continuously So are you saying that the media is allways on the move? Mine is not.I have a mag 7 feeding it.it also my sump return pump. The media never moves,I have it 3/4 full...

I didn't get one either, but maybe if I had given you the right address it might have helped. it is 230 not 203. :roll: Thank you, David :oops:

I think this might be it, http://www.cyro.com/Internet/Home.nsf/Main2!OpenPage, click on literature on the left side. Scroll down to, Working with ACRYLITE acrylic sheet - product information (- 1084) do a right click and save target as.

You might try this,www.klingspor.com/

I have done it from work and home also.

Look behind a soda foutain,it is how you get the pop out of it. It is not an air tank.The bottle has a special thread for the regulator so you can't put it on other types of cylinders(gas oxygen helium ect.). look at brewery supply, welding supply or most online fish stores have them.also you...

Thanks for the fast reply :) ,I gess if I would have read on to the second paragraph I wouldn't have had to ask. 8O Sure took a load off my mind! Thanks again,David

Hello,The parts list calls for 6" cast tube, will 6" Extruded tube work? TIA, David [/url]http://store.yahoo.com/ecomplastics/6000odcleare.html