I am wondering everyones oppinion on brine shrimp. Particularily raising your own evergrowing batch. When I first began researching my tank this seemed like a really cool idea, but as I have been reading it seems like very few people do this. My main question is why not? Are they just that hard to care for, or is it simply cheap enough to get the commercial stuff to not make it worth it?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
brine shrimp
- Thread starter gollus
- Start date
Gollus,
If you have the time and want to raise brine shrimp, then fine. Go for it.
I would ask you, however, what are you planning to do with the brine shrimp after you raise them? Your answer is probably, feed them to my tanks. The only problem with this is that brine shrimp are low in nutrition and should not be feed to your tank(s) on a daily basis. It is ok to soak them in Selcon for a half hour before feeding them to the gilled-ones. That increases their nutritional value, but do not do this every day.
IMHO brine shrimp are a great, occassional source of live food for your finned buddies. It is a treat, but the main source of their nutition should be in the form of either fresh or frozen food. I also feed my tangs nori and Seaweed Selects.
HTH
If you have the time and want to raise brine shrimp, then fine. Go for it.
I would ask you, however, what are you planning to do with the brine shrimp after you raise them? Your answer is probably, feed them to my tanks. The only problem with this is that brine shrimp are low in nutrition and should not be feed to your tank(s) on a daily basis. It is ok to soak them in Selcon for a half hour before feeding them to the gilled-ones. That increases their nutritional value, but do not do this every day.
IMHO brine shrimp are a great, occassional source of live food for your finned buddies. It is a treat, but the main source of their nutition should be in the form of either fresh or frozen food. I also feed my tangs nori and Seaweed Selects.
HTH
Raising brine shrimp can be a pain unless you have the knack for it. I have a text on it that I found while wandering the web, I hope it helps. Pay good atention to the part about aeration. I keep mine in a 2gal hex with the salt density at 1.5 When I run low I just go get some more. I also rotate my feeding to marine flakes, frozen brine and live brine. The fish are quite happy. I tried to put it as an attachment but the protacol wasn't recognised. Heres the text:
Artemia (Brine Shrimp) FAQ 1.1
by [email protected]
Date: 13 Jun 95
Artemia FAQ 1.1
Having seen all the posts about brine shrimp questions, I have decided to create a FAQ for artemia culture. It is by no means the definitive source, and will be expanded on in the future. I have gathered this information from various books, publications and my own experience in raising these guys. I have tried extremely hard to make sure I put everything in my own words so as not to plagiarize. If you recognize a sentence here and there, its because there really isnt a better way to say it. There is a wealth of information out there that gets real scientific, much of this I have left out as it really doesnt pertain to our goal of growing these critters. Anyway, here it is, hope you find it to be of use. Any comments or additions to this FAQ should be directed to me. Kai Schumann ([email protected])
The common brine shrimp (artemia) is in the phylum Arthropoda, class Crustacea. Artemia are closely related to zooplankton like Copepods and Daphnia, which are also used for live food in the aquarium. The artemia life cycle begins by the hatching of dormant cysts which are encased embryos that are metabolically inactive. The cysts can remain dormant for many years as long as they are kept dry. When the cysts are placed back into salt water they are re-hydrated and resume their development. Artemia cysts are best stored in a tightly sealed container in a cool, dry environment. The refrigerator is usually best.
After 15 to 20 hours at 25 degrees C (77 degrees F) the cyst bursts and the embryo leaves the shell. For the first few hours, the embryo hangs beneath the cyst shell, still enclosed in a hatching membrane. This is called the Umbrella stage, during this stage the nauplius completes its development and emerges as a free swimming nauplii. In the first larval stage, the nauplii is a brownish orange color because of its yolk reserves, newly hatched artemia do not feed because their mouth and anus are not fully developed. Approximately 12 hours after hatch they molt into the second larval stage and they start filter feeding on particles of various microalgae, bacteria, and detritus. The nauplii will grow and progress through 15 molts before reaching adulthood in about 8 days. Adult artemia average about 8mm long, but can reach lengths up to 20mm in the right environment. An adult is a 20 times increase in length, and a 500 times increase in biomass from the nauplli stage.
In low salinity and optimal food levels, fertilized females usually produce free swimming nauplii at a rate of up to 75 nauplii per day. They will produce 10-11 broods over an average life cycle of 50 days. Under super ideal conditions, an adult artemia can live as long as three months and produce up to 300 nauplii or cysts every 4 days. Cyst production is induced by conditions of high salinity, and chronic food shortages with high oxygen fluctuations between day and night.
Adults can tolerate brief exposures to temperatures as extreme as -18 to 40 degrees C (0-104 degrees F) Optimal temperature for cyst hatching and adult grow out is 25-30 degrees C (77-86 degrees F), but there are differences between strains, San Francisco bay strain is 22 degrees C as compared to 30 degrees C for Great Salt lake. Artemia prefer a salinity of 30-35 ppt (1.0222-1.0260 density) and can live in fresh water for about 5 hours before they die. Caution should be used to not over feed in a fresh water aquarium because of the rapid decomposition of the dead. Many fresh water fish will tolerate and even thrive in a brackish water environment of 1-5 ppt easily, so it is possible to add saltwater to the tank and extend the survival of the artemia if required.
Other variables of importance are pH, light and oxygen. A ph of 8-9 is best; pH less than 5 and greater than 10 will kill the culture. the pH can be increased with baking soda, and lowered with muriatic acid. A minimum amount of light is necessary for hatching and may be beneficial for adult grow out. A standard grow lite bulb available in an aquarium supply is adequate. Most important is the level of oxygen in the water, as this dictates what the artemia will consume. With a good oxygen supply, the artemia are a pale pink or yellow, or if they are heavily feeding on microalgae they will look green in color. In this ideal condition growth and reproduction is rapid, and a self-sustaining artemia supply is possible. If there is a low oxygen level in the water with large amounts of organic matter, or a high amount of salinity from evaporation, the artemia will feed on bacteria, detritus and yeast cells, but no algae. It is under these conditions that they produce hemoglobin and look red or orange in color. If this environment remains they will start producing resting cysts, and the colony may crash. It is very important to have a vigorous air supply in the tank for two reasons, one is to keep the available food supply in suspension where it can be filtered out, and the other is to promote a good oxygen supply in the system. (in other words - a boiling cauldron is fine)
Hatching Requirements
The optimal conditions for hatching artemia are as follows - 25 degrees C, salinity - 5 ppt (1.0030 density), heavy continuous aeration, light - 2000 lux constant illumination, pH 8-9. Good circulation is essential to keep the cysts in suspension. A container that is V shaped is best (two liter bottles work good, the absolute best Ive found are separation columns found in any lab supply - theyre expensive though). glue a valve on the cap and invert, this way unhatched cysts, empty shells, and hatched nauplii can be easily removed separately. Another idea I would highly recommend checking out was offered by Ken Cunningham ([email protected]). His discovery was to use pilsner beer glasses, Some of them have a conical point at the bottom, these are the ones to look for. Ken places three or four in a ten gallon tank and heats them by the water bath method. Put rigid air lines in the glasses with no air stones, connected by flexible tubing to the distribution manifold. 80 degrees, bright light at all times. In each glass put 1/2 teaspoon of salt, 1/2 or 1/4 teaspoon of cysts, and bubble for 24 hours. To harvest, leave the rigid tubing in the glass, but lift it out of the aquarium and disconnect the flexible air tube at the manifold. Let the glass settle in relative darkness (i.e. not bright light) for 10 minutes, and siphon the artemia out using the airline tubing into fresh water to rinse. By using the glasses on a rotation, its possible to have hatched artemia available at all times. Still another good idea comes from Wright Huntley ([email protected]) who originally got the idea from Oleg Kiselev. Wright now uses Chianti wine bottles found at Trader Joes for 4 bucks. By tilting the bottles on edge and using the same salt and cyst ratio as Ken, quite high hatch rates are being obtained. harvesting is the same, by siphoning using the air tubing, but into a funnel lined with a handkerchief, then the artemia may be rinsed if desired, and fed. There are many methods in use for hatching these guys. Once you play with whatever particular method you chose to achieve optimum performance, your results will probably be just as good as any other hatching method. Dont be afraid to experiment.
The hatching percentage and density are usually a function of water quality and circulation. Containers with flat bottoms have dead areas in the corners and are not ideal for maximum hatch rates. It doesnt take alot of cysts to get going, there are usually 200,000 to 300,000 nauplii per gram of cysts, so a half teaspoon in a two liter bottle is more than enough for the typical aquarist. With a setup of two or more bottles, one started one day, the other the next, you can have a continuous supply of newly hatched artemia for that reef tank every day. This is the method we used when I worked at Scripps Aquarium - only with 5 gallon water bottles.
Harvest the nauplii by turning off the air, or remove the air stone, and let the culture settle for about ten minutes. Hatched, empty shells float to the surface, and unhatched cysts will sink to the bottom. The newly hatched nauplii will concentrate just above the unhatched cysts on the bottom. Since the newly hatched nauplii are attracted to light (phototropic), by shining a flashlight at the center of the bottle, you can concentrate them where it is easy to siphon them off, or drain the cysts off the bottom by using the valve, then drain the nauplii onto another container. The unhatched cysts should be used in the next culture and not thrown away, most of the time they will hatch with the next batch.
Feeding
Since artemia are non-selective filter feeders (meaning they dont care what they pick out of the water), a wide range of food has been successfully used. The criteria for food selection should be based on particle size, digestibility, and solubility (powdered milk wont work). Feeds that have been used include live microalgae such as nanochloropsis and a wide variety of inert foods, which are far more practical for us aquarists. One caveat with inert foods is to be careful not to overfeed. Inert feeds include yeasts, both active and inactive (a brewers supply is the best source, bread yeast is expensive!) micronized rice bran, whey, wheat flour, soybean powder, fish meal, egg yolk, and homogenized liver. ( I havent used the last four). Dried microalgae such as spirulina has also been used with success (available from health food stores, but again kind of expensive). The simplest way to measure food levels in the tank is by figuring the transparency of the water. This is done with a dowel with measuring marks marked off in centimeters, and a white disk glued on the end. The depth where the white disk just disappears measures the light penetration into the tank. The more stuff floating around the tank, the less transparency. With a stocking density of 5000 nauplii per liter, the transparency should be 15-20 cm the first week, and 20-25 cm thereafter. Of course it is best to maintain an optimal food level at all times, so frequent feedings, or better yet, a continuous drip feeding are mandatory for optimal grow out.
Food is not directly consumed, but rather transferred to the mouth in a packaged form. The space between an artemias legs widens as the legs move forward. Water is sucked into this space from below, and small filtering hairs collect particles including food from the incoming stream. On the back stroke the water is forced out and the food remains in a groove at the base of the legs, this groove has glands that secrete an adhesive material that clumps the food into balls, and microhairs move the food packages toward the mouth. The optimal size for food should be less than 50 - 60 microns. Growing Adults - When feeding larger fish and invertebrates where small food is not needed, adult artemia may be preferred over nauplii. But why should you bother growing adults you ask? I will just feed more newly hatched brine shrimp to make up the difference you say... Well, adult artemia are 20 times longer and 500 times heavier than nauplii and therefore provide more of a meal. There is a myth floating around that adult artemia are not as good for your fish as newly hatched. There is a tiny bit of truth to this, but it depends on what you are feeding. So whats in it for your fish: Newly hatched artemia are high in fats, about 23% of dry weight. By mid juvenile stage, the fat levels have decreased to about 16 %, and by the time they are pre-adults the fat levels have decreased to about 7%. But, at the same time, the protein content has risen to replace the fat, from about 45% in a newly hatched artemia to about 63% in an adult. Based on this, you should determine what is best for your tank, young fish larvae require a high fat intake for growth and health, while older juveniles and adults need protein for health and reproduction. Also, nauplii are known to be deficient in several essential amino acids, while the adult artemia are rich in all essential amino acids. Adult artemia therefore supply more biomass than nauplii and are more nutritionally complete.
The best approach to growing adults is to pick up a 10 or 20 gallon glass aquarium cheap someplace. Take thin acrylic sheet or formica, and jam it in the tank, essentially making an oval tank. ( this is important to remove the previously mentioned dead spots, and improve circulation ) Glue all the seams with silicone (3M - Blue tube). Circulation can be enhanced by gluing a partition down the middle of the tank making a raceway arrangement. Best yields are obtained with a good food circulation, animal distribution, and strong aeration. This next step is the hardest to explain without pictures, You need to make six or eight (depending on the length of your tank) air lift tubes. These are simply 1 inch thin wall PVC, cut at 45 degrees on the bottom, with a 90 degree elbow on top. The water level should reach the middle of the elbow, with the tube touching the bottom of the tank, 45 degree cut down. Drill a hole in the 90 degree fitting so you can feed an airline 3/4 of the way down the tube. Glue these tubes to the center divide so that the 90 degree elbows all face the same direction at a 45 degree angle to the divider. Your creating a mechanism to make a constant flow of water in a clockwise or counter clockwise direction (I dont think it matters which).
AERATION
Here is where I should bring up the subject of aeration, avoid the temptation to put in wood airstones to increase flow and aeration. Yes they make beautifully fine bubbles and you can get excellent upflow with them. But its these same fine bubbles that will wreak havoc with your artemia. Artemia cannot tolerate fine bubbles since they can lodge in the swimming appendages and kill the little buggers. Artemia can actually ingest fine air bubbles which will wipe them out (I dont think you can use Gas-X for brine shrimp).
I havent had much problem with water quality, so filtration really isnt necessary on the small scale that were on. Filtration can be included if You feel so inclined, but it will require a screened overflow to a sump or cartridge filter.
Moderate aeration with coarse or no airstones, good water quality, and generally clean conditions are all important for raising high densities of adult brine shrimp. Since the artemia feed constantly, faster growth rates and better survival is achieved by multiple or continuous feeding over a 24 hour period. Best growth rates are achieved at 25-30 degrees C with salinities of 30-50 ppt and LOW light levels. Remember, artemia are drawn to strong light, so if you install that 175 watt metal halide lamp you had leftover from the reef tank, the little buggers are going to increase their swimming activity and have greater energy expenditure, resulting in slower growth rates. In low light the artemia will spread out in the water column, swimming slowly and achieving more efficient food conservation.
Maintenance
Being a low volume operation, water quality can deteriorate rapidly, especially as biomass increases (I mean, thats the whole idea right?). The problem usually occurs because of over feeding, which leads to fouling and low oxygen levels. There is a fine line between optimal feeding levels and wiping out our tank, especially when using non-living foods. To help overcome this problem, you need to take care of your artemia tank as much as you pay attention to your aquarium. Here is what you do: Clean the bottom every couple of days. You do this by turning off the air, letting the tank settle, and using that handy flashlight again (I find this works best when done at night) By now we know what our little buddies are going to do. Meanwhile siphon the crap off the bottom of the tank, remember, these guys are going to molt 15 times before becoming adults. (unless you have three hands, prop the flashlight on something). About a 20% water change per week is adequate.
Troubleshooting
My artemia just crapout and die - several causes, there could be insufficient aeration leading to asphyxiation, or you couldnt resist and used that damned wooden airstone I told you not to use. Or - theyre starving to death. The health status can be checked by looking at how theyre swimming, shine your flashlight into the tank, and they all should rapidly concentrate at the source, this is good. However, slow dispersed swimming indicates things are going to hell quick. If you have access to a microscope you can examine their digestive track, which should be full of food (assuming youve been feeding them, and you have right?) If the swimming appendages and mouth region are clean, this is good. If they are covered with food particles, this is bad. This condition could be due to the nature of the food or the physiological condition of the animals.
Slow growth
Temperature is too low, pH imbalance, salinity is off, inadequate food or lousy food quality.
Artemia storage
Your artemia can be stored for future use in several different ways, adult artemia will survive for several days in the refrigerator (if your wife will let you, mine wont) If you refrigerate them, be sure to warm them up and give them one last feeding before you feed your fish. this will restore their nutritional quality, after all, theyve been starving for the past couple of days. You can also freeze them, nope, fraid this kills them. An ice cube tray works perfect for this (here we go with the wife again, I cant do nuthin) Be sure to freeze them in 7-8 ppt saltwater for best results. Freezing is neat because all you have to do is toss an artemia cube into the tank, and you have a nifty time release food supply. You have to be careful not to over feed here, they float to the bottom and decompose quick, and you can bomb your tank rather rapidly.
Decapsulating Brine Shrimp Cysts
Having had several questions on how and why this is done, I have decided to include this procedure at the end of this FAQ. It is an involved process and not many people will choose to perform it, but it is good information to have in case you get a wild hair some day, or just want to impress your friends.
Separating nauplii from their shells may be desirable for several reasons. Cyst shells are indigestible and can lodge in the gut of predators causing fatal obstructions, and the shells have been speculated to be a source of heavy bacterial contamination. While in all my years of messing with these guys, I have never heard of anyone having problems with either of these two scenarios, quite a few commercial aquaculture ventures go to the trouble of decapsulation. Decapsulation is accomplished in four steps: re-hydrating the cysts, treating with the decapsulation solution, washing and deactivating the residual chlorine, and the hatching of the embryos.
Dry cysts have a dimple in their shell which makes it hard to remove the complete inner membrane. For this reason, the cysts are first hydrated into a spherical shape. The cysts should be re-hydrated in soft or distilled fresh water at 25 degrees C for 60-90 minutes. The lower the temperature, the longer it takes to re-hydrate them. But, no matter what the temperature, never leave them longer than 2 hours, as this decreases the percentage of decapsulated cysts and lowers the hatch rate. Hydration should be done in a container identical to the one used for hatching regular cysts for the same reasons of circulation and aeration. Cysts should be filtered on a 100-125 micron collection screen and rinsed, but this step may be missed if you dont have the screen. It is best to decapsulate the hydrated cysts immediately, but they can be refrigerated for several hours if needed. During the hydrating process, you need to prepare your chlorine solution. Either household liquid bleach or powdered pool chlorine is mixed with salt water.
In preparation for decapsulation the cysts are placed in a pre-cooled buffered solution, 4 degrees C and about pH 10, consisting of 0.33 ml of 40% sodium hydroxide (NaOH) and 4.67 ml of sea water per gram of cysts ( you may have a hard time finding NaOH, most pharmacies should have it though, I got some from work so I havent really looked much). The buffer solution is prepared by dissolving 40 grams of sodium hydroxide in 60 ml of fresh water. Decapsulation will begin when you add 10 ml of liquid bleach to the buffer solution. You will need to have a thermometer in the brew, because the chemical reaction taking place gives off heat. It is important to keep the solution between 20 and 30 degrees C. Starting with pre-cooled buffered seawater makes it easier to keep the reaction in the right temperature range. If you need to, an ice cube can be added to help drop the temp.
A second method is to add 0.70 grams of dry pool chlorine powder per gram of cysts. In this case the buffer is sodium carbonate consisting of 0.68 grams sodium carbonate in 13.5 ml water. It is easier to split the water in two equal parts, add the required amount of chlorine to the first part, and the sodium carbonate to the second. Allow them to dissolve and react, which will cause a precipitate. Pre-cool the two solutions, and mix them together, then add the hydrated cysts. During decapsulation, stir the brew continuously to minimize foam formation, and to dissipate heat. Note the color of the solution, it will change from a dark brown to grey, to white, and then to a bright orange. This reaction usually takes 2-4 minutes. With the calcium hypochlorite solution, the cysts will change only to gray, and will take about 4-7 minutes.
The cysts can be filtered from the solution as soon as the membranes have dissolved as indicated by the color (bright orange or grey). The chlorine should be washed off the cysts by rinsing with fresh water or salt water until you cant smell the chlorine anymore. The residual chlorine attaches itself to the decapsulated eggs, and has to be neutralized. Do this by washing the cysts in a 0.1% sodium thiosulfate (0.1 gram sodium thiosulfate in 99.9 grams water) for one minute. An alternative method uses acetic acid (1 part 5% vinegar to 7 parts water). The first method works better, but the second method is easier as everyone has the materials in their kitchen. The cysts are then re-washed with fresh or sale water a placed into the hatching container, and hatched as normal artemia. The decapsulated cysts can be hatched immediately, or stored in the refrigerator for up to 7 days before hatching. For long term storage, like the expensive stuff you can buy, the cysts need to be dehydrated.
Dehydration of the decapsulated cysts is done by transferring your one gram of decapsulated cysts into a saturated brine solution of 330 grams salt to 1 liter water. Aerate this for 18 hours, replacing the solution every 2 hours. The cysts are releasing their water through osmosis in the solution, so it is important to keep the salt concentration high. After 18 hours, the cysts have lost about 80% of their cellular water, stop the air flow and let everything settle, then filter the cysts out. These cysts can then be placed in a container and topped off with fresh brine solution. seal the container and store it in the refrigerator or freezer. Cysts with 16-20% cellular water can be stored for a few months without a decrease in hatching rate. For a longer term storage, you have to reduce the cellular water content to less than 10%.
Artemia (Brine Shrimp) FAQ 1.1
by [email protected]
Date: 13 Jun 95
Artemia FAQ 1.1
Having seen all the posts about brine shrimp questions, I have decided to create a FAQ for artemia culture. It is by no means the definitive source, and will be expanded on in the future. I have gathered this information from various books, publications and my own experience in raising these guys. I have tried extremely hard to make sure I put everything in my own words so as not to plagiarize. If you recognize a sentence here and there, its because there really isnt a better way to say it. There is a wealth of information out there that gets real scientific, much of this I have left out as it really doesnt pertain to our goal of growing these critters. Anyway, here it is, hope you find it to be of use. Any comments or additions to this FAQ should be directed to me. Kai Schumann ([email protected])
The common brine shrimp (artemia) is in the phylum Arthropoda, class Crustacea. Artemia are closely related to zooplankton like Copepods and Daphnia, which are also used for live food in the aquarium. The artemia life cycle begins by the hatching of dormant cysts which are encased embryos that are metabolically inactive. The cysts can remain dormant for many years as long as they are kept dry. When the cysts are placed back into salt water they are re-hydrated and resume their development. Artemia cysts are best stored in a tightly sealed container in a cool, dry environment. The refrigerator is usually best.
After 15 to 20 hours at 25 degrees C (77 degrees F) the cyst bursts and the embryo leaves the shell. For the first few hours, the embryo hangs beneath the cyst shell, still enclosed in a hatching membrane. This is called the Umbrella stage, during this stage the nauplius completes its development and emerges as a free swimming nauplii. In the first larval stage, the nauplii is a brownish orange color because of its yolk reserves, newly hatched artemia do not feed because their mouth and anus are not fully developed. Approximately 12 hours after hatch they molt into the second larval stage and they start filter feeding on particles of various microalgae, bacteria, and detritus. The nauplii will grow and progress through 15 molts before reaching adulthood in about 8 days. Adult artemia average about 8mm long, but can reach lengths up to 20mm in the right environment. An adult is a 20 times increase in length, and a 500 times increase in biomass from the nauplli stage.
In low salinity and optimal food levels, fertilized females usually produce free swimming nauplii at a rate of up to 75 nauplii per day. They will produce 10-11 broods over an average life cycle of 50 days. Under super ideal conditions, an adult artemia can live as long as three months and produce up to 300 nauplii or cysts every 4 days. Cyst production is induced by conditions of high salinity, and chronic food shortages with high oxygen fluctuations between day and night.
Adults can tolerate brief exposures to temperatures as extreme as -18 to 40 degrees C (0-104 degrees F) Optimal temperature for cyst hatching and adult grow out is 25-30 degrees C (77-86 degrees F), but there are differences between strains, San Francisco bay strain is 22 degrees C as compared to 30 degrees C for Great Salt lake. Artemia prefer a salinity of 30-35 ppt (1.0222-1.0260 density) and can live in fresh water for about 5 hours before they die. Caution should be used to not over feed in a fresh water aquarium because of the rapid decomposition of the dead. Many fresh water fish will tolerate and even thrive in a brackish water environment of 1-5 ppt easily, so it is possible to add saltwater to the tank and extend the survival of the artemia if required.
Other variables of importance are pH, light and oxygen. A ph of 8-9 is best; pH less than 5 and greater than 10 will kill the culture. the pH can be increased with baking soda, and lowered with muriatic acid. A minimum amount of light is necessary for hatching and may be beneficial for adult grow out. A standard grow lite bulb available in an aquarium supply is adequate. Most important is the level of oxygen in the water, as this dictates what the artemia will consume. With a good oxygen supply, the artemia are a pale pink or yellow, or if they are heavily feeding on microalgae they will look green in color. In this ideal condition growth and reproduction is rapid, and a self-sustaining artemia supply is possible. If there is a low oxygen level in the water with large amounts of organic matter, or a high amount of salinity from evaporation, the artemia will feed on bacteria, detritus and yeast cells, but no algae. It is under these conditions that they produce hemoglobin and look red or orange in color. If this environment remains they will start producing resting cysts, and the colony may crash. It is very important to have a vigorous air supply in the tank for two reasons, one is to keep the available food supply in suspension where it can be filtered out, and the other is to promote a good oxygen supply in the system. (in other words - a boiling cauldron is fine)
Hatching Requirements
The optimal conditions for hatching artemia are as follows - 25 degrees C, salinity - 5 ppt (1.0030 density), heavy continuous aeration, light - 2000 lux constant illumination, pH 8-9. Good circulation is essential to keep the cysts in suspension. A container that is V shaped is best (two liter bottles work good, the absolute best Ive found are separation columns found in any lab supply - theyre expensive though). glue a valve on the cap and invert, this way unhatched cysts, empty shells, and hatched nauplii can be easily removed separately. Another idea I would highly recommend checking out was offered by Ken Cunningham ([email protected]). His discovery was to use pilsner beer glasses, Some of them have a conical point at the bottom, these are the ones to look for. Ken places three or four in a ten gallon tank and heats them by the water bath method. Put rigid air lines in the glasses with no air stones, connected by flexible tubing to the distribution manifold. 80 degrees, bright light at all times. In each glass put 1/2 teaspoon of salt, 1/2 or 1/4 teaspoon of cysts, and bubble for 24 hours. To harvest, leave the rigid tubing in the glass, but lift it out of the aquarium and disconnect the flexible air tube at the manifold. Let the glass settle in relative darkness (i.e. not bright light) for 10 minutes, and siphon the artemia out using the airline tubing into fresh water to rinse. By using the glasses on a rotation, its possible to have hatched artemia available at all times. Still another good idea comes from Wright Huntley ([email protected]) who originally got the idea from Oleg Kiselev. Wright now uses Chianti wine bottles found at Trader Joes for 4 bucks. By tilting the bottles on edge and using the same salt and cyst ratio as Ken, quite high hatch rates are being obtained. harvesting is the same, by siphoning using the air tubing, but into a funnel lined with a handkerchief, then the artemia may be rinsed if desired, and fed. There are many methods in use for hatching these guys. Once you play with whatever particular method you chose to achieve optimum performance, your results will probably be just as good as any other hatching method. Dont be afraid to experiment.
The hatching percentage and density are usually a function of water quality and circulation. Containers with flat bottoms have dead areas in the corners and are not ideal for maximum hatch rates. It doesnt take alot of cysts to get going, there are usually 200,000 to 300,000 nauplii per gram of cysts, so a half teaspoon in a two liter bottle is more than enough for the typical aquarist. With a setup of two or more bottles, one started one day, the other the next, you can have a continuous supply of newly hatched artemia for that reef tank every day. This is the method we used when I worked at Scripps Aquarium - only with 5 gallon water bottles.
Harvest the nauplii by turning off the air, or remove the air stone, and let the culture settle for about ten minutes. Hatched, empty shells float to the surface, and unhatched cysts will sink to the bottom. The newly hatched nauplii will concentrate just above the unhatched cysts on the bottom. Since the newly hatched nauplii are attracted to light (phototropic), by shining a flashlight at the center of the bottle, you can concentrate them where it is easy to siphon them off, or drain the cysts off the bottom by using the valve, then drain the nauplii onto another container. The unhatched cysts should be used in the next culture and not thrown away, most of the time they will hatch with the next batch.
Feeding
Since artemia are non-selective filter feeders (meaning they dont care what they pick out of the water), a wide range of food has been successfully used. The criteria for food selection should be based on particle size, digestibility, and solubility (powdered milk wont work). Feeds that have been used include live microalgae such as nanochloropsis and a wide variety of inert foods, which are far more practical for us aquarists. One caveat with inert foods is to be careful not to overfeed. Inert feeds include yeasts, both active and inactive (a brewers supply is the best source, bread yeast is expensive!) micronized rice bran, whey, wheat flour, soybean powder, fish meal, egg yolk, and homogenized liver. ( I havent used the last four). Dried microalgae such as spirulina has also been used with success (available from health food stores, but again kind of expensive). The simplest way to measure food levels in the tank is by figuring the transparency of the water. This is done with a dowel with measuring marks marked off in centimeters, and a white disk glued on the end. The depth where the white disk just disappears measures the light penetration into the tank. The more stuff floating around the tank, the less transparency. With a stocking density of 5000 nauplii per liter, the transparency should be 15-20 cm the first week, and 20-25 cm thereafter. Of course it is best to maintain an optimal food level at all times, so frequent feedings, or better yet, a continuous drip feeding are mandatory for optimal grow out.
Food is not directly consumed, but rather transferred to the mouth in a packaged form. The space between an artemias legs widens as the legs move forward. Water is sucked into this space from below, and small filtering hairs collect particles including food from the incoming stream. On the back stroke the water is forced out and the food remains in a groove at the base of the legs, this groove has glands that secrete an adhesive material that clumps the food into balls, and microhairs move the food packages toward the mouth. The optimal size for food should be less than 50 - 60 microns. Growing Adults - When feeding larger fish and invertebrates where small food is not needed, adult artemia may be preferred over nauplii. But why should you bother growing adults you ask? I will just feed more newly hatched brine shrimp to make up the difference you say... Well, adult artemia are 20 times longer and 500 times heavier than nauplii and therefore provide more of a meal. There is a myth floating around that adult artemia are not as good for your fish as newly hatched. There is a tiny bit of truth to this, but it depends on what you are feeding. So whats in it for your fish: Newly hatched artemia are high in fats, about 23% of dry weight. By mid juvenile stage, the fat levels have decreased to about 16 %, and by the time they are pre-adults the fat levels have decreased to about 7%. But, at the same time, the protein content has risen to replace the fat, from about 45% in a newly hatched artemia to about 63% in an adult. Based on this, you should determine what is best for your tank, young fish larvae require a high fat intake for growth and health, while older juveniles and adults need protein for health and reproduction. Also, nauplii are known to be deficient in several essential amino acids, while the adult artemia are rich in all essential amino acids. Adult artemia therefore supply more biomass than nauplii and are more nutritionally complete.
The best approach to growing adults is to pick up a 10 or 20 gallon glass aquarium cheap someplace. Take thin acrylic sheet or formica, and jam it in the tank, essentially making an oval tank. ( this is important to remove the previously mentioned dead spots, and improve circulation ) Glue all the seams with silicone (3M - Blue tube). Circulation can be enhanced by gluing a partition down the middle of the tank making a raceway arrangement. Best yields are obtained with a good food circulation, animal distribution, and strong aeration. This next step is the hardest to explain without pictures, You need to make six or eight (depending on the length of your tank) air lift tubes. These are simply 1 inch thin wall PVC, cut at 45 degrees on the bottom, with a 90 degree elbow on top. The water level should reach the middle of the elbow, with the tube touching the bottom of the tank, 45 degree cut down. Drill a hole in the 90 degree fitting so you can feed an airline 3/4 of the way down the tube. Glue these tubes to the center divide so that the 90 degree elbows all face the same direction at a 45 degree angle to the divider. Your creating a mechanism to make a constant flow of water in a clockwise or counter clockwise direction (I dont think it matters which).
AERATION
Here is where I should bring up the subject of aeration, avoid the temptation to put in wood airstones to increase flow and aeration. Yes they make beautifully fine bubbles and you can get excellent upflow with them. But its these same fine bubbles that will wreak havoc with your artemia. Artemia cannot tolerate fine bubbles since they can lodge in the swimming appendages and kill the little buggers. Artemia can actually ingest fine air bubbles which will wipe them out (I dont think you can use Gas-X for brine shrimp).
I havent had much problem with water quality, so filtration really isnt necessary on the small scale that were on. Filtration can be included if You feel so inclined, but it will require a screened overflow to a sump or cartridge filter.
Moderate aeration with coarse or no airstones, good water quality, and generally clean conditions are all important for raising high densities of adult brine shrimp. Since the artemia feed constantly, faster growth rates and better survival is achieved by multiple or continuous feeding over a 24 hour period. Best growth rates are achieved at 25-30 degrees C with salinities of 30-50 ppt and LOW light levels. Remember, artemia are drawn to strong light, so if you install that 175 watt metal halide lamp you had leftover from the reef tank, the little buggers are going to increase their swimming activity and have greater energy expenditure, resulting in slower growth rates. In low light the artemia will spread out in the water column, swimming slowly and achieving more efficient food conservation.
Maintenance
Being a low volume operation, water quality can deteriorate rapidly, especially as biomass increases (I mean, thats the whole idea right?). The problem usually occurs because of over feeding, which leads to fouling and low oxygen levels. There is a fine line between optimal feeding levels and wiping out our tank, especially when using non-living foods. To help overcome this problem, you need to take care of your artemia tank as much as you pay attention to your aquarium. Here is what you do: Clean the bottom every couple of days. You do this by turning off the air, letting the tank settle, and using that handy flashlight again (I find this works best when done at night) By now we know what our little buddies are going to do. Meanwhile siphon the crap off the bottom of the tank, remember, these guys are going to molt 15 times before becoming adults. (unless you have three hands, prop the flashlight on something). About a 20% water change per week is adequate.
Troubleshooting
My artemia just crapout and die - several causes, there could be insufficient aeration leading to asphyxiation, or you couldnt resist and used that damned wooden airstone I told you not to use. Or - theyre starving to death. The health status can be checked by looking at how theyre swimming, shine your flashlight into the tank, and they all should rapidly concentrate at the source, this is good. However, slow dispersed swimming indicates things are going to hell quick. If you have access to a microscope you can examine their digestive track, which should be full of food (assuming youve been feeding them, and you have right?) If the swimming appendages and mouth region are clean, this is good. If they are covered with food particles, this is bad. This condition could be due to the nature of the food or the physiological condition of the animals.
Slow growth
Temperature is too low, pH imbalance, salinity is off, inadequate food or lousy food quality.
Artemia storage
Your artemia can be stored for future use in several different ways, adult artemia will survive for several days in the refrigerator (if your wife will let you, mine wont) If you refrigerate them, be sure to warm them up and give them one last feeding before you feed your fish. this will restore their nutritional quality, after all, theyve been starving for the past couple of days. You can also freeze them, nope, fraid this kills them. An ice cube tray works perfect for this (here we go with the wife again, I cant do nuthin) Be sure to freeze them in 7-8 ppt saltwater for best results. Freezing is neat because all you have to do is toss an artemia cube into the tank, and you have a nifty time release food supply. You have to be careful not to over feed here, they float to the bottom and decompose quick, and you can bomb your tank rather rapidly.
Decapsulating Brine Shrimp Cysts
Having had several questions on how and why this is done, I have decided to include this procedure at the end of this FAQ. It is an involved process and not many people will choose to perform it, but it is good information to have in case you get a wild hair some day, or just want to impress your friends.
Separating nauplii from their shells may be desirable for several reasons. Cyst shells are indigestible and can lodge in the gut of predators causing fatal obstructions, and the shells have been speculated to be a source of heavy bacterial contamination. While in all my years of messing with these guys, I have never heard of anyone having problems with either of these two scenarios, quite a few commercial aquaculture ventures go to the trouble of decapsulation. Decapsulation is accomplished in four steps: re-hydrating the cysts, treating with the decapsulation solution, washing and deactivating the residual chlorine, and the hatching of the embryos.
Dry cysts have a dimple in their shell which makes it hard to remove the complete inner membrane. For this reason, the cysts are first hydrated into a spherical shape. The cysts should be re-hydrated in soft or distilled fresh water at 25 degrees C for 60-90 minutes. The lower the temperature, the longer it takes to re-hydrate them. But, no matter what the temperature, never leave them longer than 2 hours, as this decreases the percentage of decapsulated cysts and lowers the hatch rate. Hydration should be done in a container identical to the one used for hatching regular cysts for the same reasons of circulation and aeration. Cysts should be filtered on a 100-125 micron collection screen and rinsed, but this step may be missed if you dont have the screen. It is best to decapsulate the hydrated cysts immediately, but they can be refrigerated for several hours if needed. During the hydrating process, you need to prepare your chlorine solution. Either household liquid bleach or powdered pool chlorine is mixed with salt water.
In preparation for decapsulation the cysts are placed in a pre-cooled buffered solution, 4 degrees C and about pH 10, consisting of 0.33 ml of 40% sodium hydroxide (NaOH) and 4.67 ml of sea water per gram of cysts ( you may have a hard time finding NaOH, most pharmacies should have it though, I got some from work so I havent really looked much). The buffer solution is prepared by dissolving 40 grams of sodium hydroxide in 60 ml of fresh water. Decapsulation will begin when you add 10 ml of liquid bleach to the buffer solution. You will need to have a thermometer in the brew, because the chemical reaction taking place gives off heat. It is important to keep the solution between 20 and 30 degrees C. Starting with pre-cooled buffered seawater makes it easier to keep the reaction in the right temperature range. If you need to, an ice cube can be added to help drop the temp.
A second method is to add 0.70 grams of dry pool chlorine powder per gram of cysts. In this case the buffer is sodium carbonate consisting of 0.68 grams sodium carbonate in 13.5 ml water. It is easier to split the water in two equal parts, add the required amount of chlorine to the first part, and the sodium carbonate to the second. Allow them to dissolve and react, which will cause a precipitate. Pre-cool the two solutions, and mix them together, then add the hydrated cysts. During decapsulation, stir the brew continuously to minimize foam formation, and to dissipate heat. Note the color of the solution, it will change from a dark brown to grey, to white, and then to a bright orange. This reaction usually takes 2-4 minutes. With the calcium hypochlorite solution, the cysts will change only to gray, and will take about 4-7 minutes.
The cysts can be filtered from the solution as soon as the membranes have dissolved as indicated by the color (bright orange or grey). The chlorine should be washed off the cysts by rinsing with fresh water or salt water until you cant smell the chlorine anymore. The residual chlorine attaches itself to the decapsulated eggs, and has to be neutralized. Do this by washing the cysts in a 0.1% sodium thiosulfate (0.1 gram sodium thiosulfate in 99.9 grams water) for one minute. An alternative method uses acetic acid (1 part 5% vinegar to 7 parts water). The first method works better, but the second method is easier as everyone has the materials in their kitchen. The cysts are then re-washed with fresh or sale water a placed into the hatching container, and hatched as normal artemia. The decapsulated cysts can be hatched immediately, or stored in the refrigerator for up to 7 days before hatching. For long term storage, like the expensive stuff you can buy, the cysts need to be dehydrated.
Dehydration of the decapsulated cysts is done by transferring your one gram of decapsulated cysts into a saturated brine solution of 330 grams salt to 1 liter water. Aerate this for 18 hours, replacing the solution every 2 hours. The cysts are releasing their water through osmosis in the solution, so it is important to keep the salt concentration high. After 18 hours, the cysts have lost about 80% of their cellular water, stop the air flow and let everything settle, then filter the cysts out. These cysts can then be placed in a container and topped off with fresh brine solution. seal the container and store it in the refrigerator or freezer. Cysts with 16-20% cellular water can be stored for a few months without a decrease in hatching rate. For a longer term storage, you have to reduce the cellular water content to less than 10%.
Danm, SM beat me to it.......
Very nice compilation.
FWIW, I've done artemia culture myself and it's really pain in the *ss. However, the previously mentioned nutritional value comment only applies if you are feeding artemia to fishes directly.
If you gut feed Live brine shrimp with phyto or other fine organic nutritional mush, artemia would be a great medium to supplement these nutrients to your fish, nutrition that your fish would normally ignor when feeding.
Very nice compilation.
FWIW, I've done artemia culture myself and it's really pain in the *ss. However, the previously mentioned nutritional value comment only applies if you are feeding artemia to fishes directly.
If you gut feed Live brine shrimp with phyto or other fine organic nutritional mush, artemia would be a great medium to supplement these nutrients to your fish, nutrition that your fish would normally ignor when feeding.
Just a thought from someone who's tried it...
Don't bother unless you have space and alot of time. The greenwater culture to keep them alive is a huge drain on time. Articifial sources work, but cause dirtying of tanks very quickly so the tanks need to be turned over quickly.
I've opted to just keep 2 35g trash cans outdoors with live cultures. I place them in a moderate sun area (no midday sun). I fill them with changed tank water and add some adult brine (or if I don't have any, some cysts) and then some greenwater to kick things off. Once its started I do little else. Sometimes I will spike the 35g tubs with a batch of fresh greenwater or roti-feed just to kick the population back off. By the end of the growing season (Sept in NC) the buckets are RANK with decay in the bottom and need to be cleaned out for the next season.
Wade
Don't bother unless you have space and alot of time. The greenwater culture to keep them alive is a huge drain on time. Articifial sources work, but cause dirtying of tanks very quickly so the tanks need to be turned over quickly.
I've opted to just keep 2 35g trash cans outdoors with live cultures. I place them in a moderate sun area (no midday sun). I fill them with changed tank water and add some adult brine (or if I don't have any, some cysts) and then some greenwater to kick things off. Once its started I do little else. Sometimes I will spike the 35g tubs with a batch of fresh greenwater or roti-feed just to kick the population back off. By the end of the growing season (Sept in NC) the buckets are RANK with decay in the bottom and need to be cleaned out for the next season.
Wade
Sorry the text is so long. When I tried to upload it as an attachment it wouldn't do it. The nutrition in todays flakes is great. I figure it helps make up for what the fish don't get with the live brine. So I rotate between the two.
SM: Marked For Archiving?
If you want I can upload the text to the library area.
SM: Marked For Archiving?
If you want I can upload the text to the library area.
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
