many items for sale

[gforce6]

Due to upgrading to 90G tank, I need to sell my 65G tank with stand.
It is AGA 36x18x24 regular tank with pine stand. I drilled 3 hole(1.5") top right, left, and center. two top corners for close loop and center for overflow. This tank has up and running almost an year aand a half.

1. 65G tank with three hole in top both corners and center with pine stand and plumbing $200

2. Amiracle sump $30

4. CSL 36" PC 96W 50/50 $60 just replace bulb last month.

5. Euroreef 5-2 skimmer, just body no pump $90 Pending to TIPPYTURTLE

6. JALLI 18W 17" long refugium light $15

7. SCWD $20 Pending to Kuya Mark

Here is some picture

9. Amiracle air stone type model with air pump and 2 wood stones $15.00 This was my first skimmer
when I started 29G tank about 8-9 years ago.
BTW, this skimmer has leak from the bottom part, so I put seal to stop it. you can look at the bottom part.

10. Amiracle u-tube overflow box rated 600GPH $25 one of teeth in the cover glued, good condition. used about 1 year, never lost siphon.

All items are ready to pick up in Fresh Meadows in Queens.

 

[SlamaJama]

ill take the mag 7 pump

 

[KuyaMark]

hey i'll take #7 and also my friend might take the sump and overflow box

Mark

 

[regal]

pm send for the 96W PC.

 

[gforce6]

Sent you PM guys,,,
Let me know, I really want to get this stuff out of my house.

Jung

 

[Josh]

That first pic is great. It must have been fun to have a tank that cool.

 

[marrone]

I'm interested in the skimmer what model, size and how much room it takes up in the sump and what pump where you running it with.

thanks
Michael

 

[gforce6]

Thanks JoshSaul, this tank was pretty easy for me to run and very low energy consumed. one mag9(93W) return with SCWD, Sedra 3500(35W) for skimmer, 150W heater, and 96W PC. I guess little over than 4KW in 24hours. I missed this tank, but Hey I got my 90G up and running.

Michael, It is Euro Reef CS5-2 rated 75G, foot print of 9" x 9", and height of 20". You will need Sedra 3500 for this skimmer. I really like this skimmer but I need bigger skimmer for my 90G tank. I will let it go for $90, if you want it.

Jung

 

[marrone]

I'm a little concerned on the size and if it will fix in my new sump. The area where it will go it 12" by 5" so I'm not sure if the skimmer will fix in that area. Also what does a Sedra 3500 go for?

 

[Deanos]

Also what does a Sedra 3500 go for?

Aquatic Warehouse

Global Aquarium Supply

Salty Critter

 

[marrone]

Thanks Dean, I found the 1st one before and the price is about 2x as much as the other places. I have a feeling it just wouldn't fix it my sump.

 

[gforce6]

Michael, this skimmer is too big to fit in your sump. You have to have at least 9x9. Anyway, Sedra3500 is about $80 from online.

 

[marrone]

Yeah that what I thought. My sump is long enough but not wide enough for it. I could place it in the middle but I would lost my refug which I don't want to do, I also place corals in there.

 

[DEEPWATER]

hey jung
what the dementions on the sump ,,,is it still avill,,and the skimmer too ,,ill pm you

 

[joseney21]

interested in sump and skimmer. can i go see it tomorrow??

 

[gforce6]

Updated
Mag7 sold!!
Prizm Skimmer sold

 

[samster]

if the sump is still avilable im intrested ty - sam

 

[gforce6]

sorry, Sump is sold

 

[spykes]

if you guys want just use a gen-x needlewheel like a 1000 or a 4100 should pull around 5-10lpm good enough for a es-5 the new ER are no longer using sedras. a 4100 should do really well for a es 52