Pax-Bellum LLC

Experienced Reefer
Vendor
Location
New Milford, CT
Rating - 0%
0   0   0
The ARID PB is our standard in Macro Algae Reactors, the body is 18 inches tall giving the unit an overall height of 23.25 Inches (measurement taken from bottom of feet to top of heat sink).

Recently I tested the PAR and energy consumption of our Enhanced 24 model, in this demonstration we will be testing the PAR output of the ARID PB 18 model.

pbtestsetup.jpg

Here you can see the probe of our Apogee meter is fully submersed in fresh water for the tests. The probe is approximately 1.5" away from the light tube containing the LED array.



pbtestreading.jpg

Here you can see the Apogee is reading 181

img_1486.jpg

Here is a close up the apogee reading 181


While performing this test, I also took a moment to test the power consumption of the ARID PB18.

When powered up the PB18 consumes 15 watts of energy, yes, 15 watts!

When coupled with a Maxi-Jet1200 for flow to the reactor, the total system power consumption is 31 watts!

:splitspin:splitspin:splitspin:splitspin:splitspin:splitspinFOR THOSE OF YOU ATTENDING THE MR Spring Frag Swap! :splitspin:splitspin:splitspin:splitspin:splitspin:splitspin

Manhattan Reefs will be RAFFLING one of our ARID PB18 Reactors!!!

More info here on the MR Raffle HERE

Come by our Booth and Say Hello!


One of our Macro Algae Reactors will be running on one of Exotic Reef Creations (Thanks Guys!) holding tanks at the swap.

Stop by our Booth and say Hello!

See you there! -Leo
 
Last edited:

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top