DIY Kalk reactor

[duke62]

The ATO is only going to be turning on at night. The mixing pump will not be running in that time Mixing pump will turn on 15 min at 1pm,5pm and 10pm 15 min intervals. Vio the top is pretty air tight with the thick round washer and tape. I tried to make it as air tight as possible. I read of people doing the ATO container like a kalk reactor with just the garbage can top on

 

[duke62]

Pretty much done

 

[duke62]

Only issue is I cant put the fill line to the bottom of the reactor. When the pump turns off I get the reverse suction so im just going to let it fill from the top

 

[duke62]

Worked out some kinks and its now complete

 

[vio]

I will pm u tomorrow , to tell u , if this work 5" Coupling , i think i got one use.

 

[duke62]

All hooked up,set my controller so the kalk stirring pump turns on at 2pm for 15 minutes 3 times a day so every 8 hours and my ATO pump turns on at 6pm for 10 minutes every 8 hours.