Vendor for basic home install

[thirty6]

Pm if do basic home install

I'm clearly fed up with the effen nonsense with my tank
Was running with zero issue, now not so much just filled an emergency tank and trying to catch my fish. Somehow I spring a leak under tank. M looking for a redo underneath because I could fudge up about anything
Pm key!

I live in Essex county NJ, would like done this week if possible. If you know what your doing probably an hour of your time and clearly I will pay for that time. Joe

 

[thirty6]

And of course my harli tusk is being super cooperative at moment. Took shrimp out of net as i was swapping buckets. Lil m effer

 

[CHEMCHEF]

At least he's getting his nutrition.
Best of luck with the tank.
It may just be a loose bulkhead.
Can you see where it's leaking from??

 

[NYreefNoob]

can you see where it is leaking from ?

 

[thirty6]

No. I thought i tightened the pc that was leaking but i notice pooling of water in rear of stand, could be bulkheads or ato container leakd either way i drained water and rock into an emergency setup. Plan to remove evrything underneath, dry out, repaint it and figure wth is wrong. I think i may put a liner in as well
Tank been running few months

 

[NYreefNoob]

how far you live from where i met you ?

 

[thirty6]

Maybe 30 min or so

 

[NYreefNoob]

closer or further ? lol and really need water in it to see where it is leaking from. i know ya gonna pull everything to dry ect but makes finding the real issue easier

 

[thirty6]

30 min Further,

Tank has been drained into brutes, heaters, power heads and rocks. Tank been cycled a month. This blows. I know it could be worse, and I am lucky i had spare tank and buckets with ample space and all that but im cranked!
After work tomorrow I'll asses if any damage to stand which I doubt as its built like a tank, it'll dry, get painted and hopefully put back together Friday. If not sooner I guess

 

[thirty6]

couple pm's, back up top

 

[fishman1069]

That sux dude! If I were closer, I'd be there to help you out. Good luck with it man :beer:

 

[thirty6]

thanks

 

[cody0709]

I can help you out, pM me

 

[edd]

hi joe, im available today before 4 or after 6 or any other day.

 

[thirty6]

So I had today off and dedicated most of it to figuring out WTF went wrong

I located a crack in manifold joint (PVC) and a small crack in my sump. I repainted inside of stand, cleaned up some equipment and tank is now back up and running. Hopefully the only setback I have now
Thank you to everyone who offered to help, I'm glad it was something simple and for most part easy to fix

 

[fishman1069]

Good to hear man :beer:

 

[thirty6]

Was big relief Made the cabinet a little neater in the process so worked out ok

 

[thirty5]

Don't use sooooo much teflon.. Or don't get all pitted up when you are tightening things!

 

[thirty6]

Shhh Teflon is our friends!
what day for bk?