diy ozone reactor

[ravi197699]

hi below are some pic of my new project " ozone reactor" after reading so many "diy ozone reactor" theads on yahoo and google and see pics of diy ozone reactor projects i have come to conclusion of this design and thanks to my friend Rob aka "jeftica" who told me of a place where i can find everything i need for this project and have them cut at the same time while i am there, this place on canal st in manhattan its called canal street plastic. these guys have so many precut acrylic tubes with different lengths and diameters and discs precut or they can cut. if you are not good with measurings like me i told them what i am trying to achieve and they did the whole this and have these pieses cut and ready with in 45 mins. i hope this thread help someone do their project with in their reach. don't have to spend 140 on reactors that are simple to make.
this will run with venturi which i am buying from avast marine and threre will be air guage 1-15 psi that is going to tell me pressure within the reactor and air pressure is going to push water out of the pipe that is going to come out of the top and that pipe is going to feed my carbon reactor and then out to tank. i have my diy air dryer and i make out of acrylic pipe as well that i bought from same place 12" 2.5 in diameter for 1.99 i will fill them with silica beads that i bought from hobbylobby.com 5lbs for 5.99 and color changing beads for 15.00 5lbs that i am going to mix togather i will have two air dryers just in case i have to swap one to recharge the other one. and ozone generator that will be controlled by my neptune apex. and that should do it. if i am missiing anything please let me know like always your suggestions and comments will help me improve.

any comments and suggestions are welcome, i

thanks

happy reefing

 

[rickytr23]

how does the end produce look like

 

[ravi197699]

i will post pics before i install it on my tank