Looking for a DIY for UV bulbs into AI sol

[vio]

The LEDs in your link is 410-420 nm
in this link is 410-430 nm.........is just a bulb.
http://www.ebay.com/itm/Mini-5X3W-U...494?pt=LH_DefaultDomain_0&hash=item1c35579cbe

 

[duke62]

The kit I posted isnt good enough for supplemental UV?

 

[vio]

Not sure if anybody can answer that ?!
I own Orphek Atlantik V2 WiFi they have 42 exclusive UV/violet/white LEDs with increased intensity of Lm/w.


http://orphek.com/orphek-atlantik-v2-wifi/

 

[vio]

I got some frags from ValorG (member here) he got Super,Super nice color SPS, then he use DIY Rapidled fix. only white and Royal Blue.

 

[duke62]

Yes I know. I want to try something different

 

[duke62]

So anyone else know exactly what else I need with the kit and heatsink I posted? And will 3 of these kits be enough to give me supplemental UV?

 

[lnevo]

Duke that kit looks like it has what you need, but i would suggest one of those kits for each AI you have.

 

[lnevo]

Just to clarify, the driver is a built in power supply...i dont think thats the right heatsink though but it looks like it would cool without needing a fan. I believe the UV leds run at 700 or 500 mA so shouldnt get as hot as a 1A cree

 

[duke62]

So all I would need is that kit those heats sinks and that it? What about lenses? I want a wider optic so im thinking 90 optics and I would need something to use to mount it to the sides of the AI

 

[lnevo]

Now your getting complicated. How high are your ai's mounted? And what size area are you looking to cover. 90 should be fine and you'll have to figure out a mounting option for sure. Does it need to attach to the ai's

 

[lnevo]

And led without optic is 120 degree so you want narrower if you add optics

 

[duke62]

I want to mount them onto the AI. On the sides. 2 on one side 2 on the other. Just trying to figure out how to do it. I dont care what it looks like because I will be putting a canopy on soon

 

[lnevo]

Maybe just put a bar connecting two them and have that straddle across each AI. Its hard to help on mounting since I don't know how they are mounted now...but that part is just mechanical.

 

[duke62]

Any problem with drill holes in the heat sinks on new heat sink? Im thinking I can attach the UV to that using a small bolt attched to the plastic housing on the AI

 

[dherrera83]

If ur only adding a few would I be possible to use the lunar led kit from rapidled and just swap them for uv lights? Its dyi kit anyway. Just some thought. Would be good for 2-4 uv lights.

 

[lnevo]

The driver on that kit is only 350mA. The uv chips are rated for 700mA