Building a 3D wall

[Hanger22reefing]

Hey guys I'm building a 3D wall and I'm going to use 2-inch PVC pipe and I was wondering if A 6 to 8 inch fish would be able fit in the 2-inch PVC if not can you give me any suggestions thank you very much

Sent from my SM-G930T using Tapatalk

 

[reefiness]

I would say it depends a lot of the type of fish. A fish like an 8" bird wrasse would easily fit through a 2" PVC. On the other hand, a lionfish that large, likely wouldnt try squeezing through that.

 

[Hanger22reefing]

I would say it depends a lot of the type of fish. A fish like an 8" bird wrasse would easily fit through a 2" PVC. On the other hand, a lionfish that large, likely wouldnt try squeezing through that.

They are blue tang, blond nas tang,clown tang,powder blue tang

Sent from my SM-G930T using Tapatalk

 

[albano]

If a fish dies in the PVC, will you be able to see and remove it?

 

[marklugo23]

What's a 3d wall guys?

 

[Hanger22reefing]

If a fish dies in the PVC, will you be able to see and remove it?

No I wouldn't be able to

Sent from my SM-G930T using Tapatalk

 

[Hanger22reefing]

What's a 3d wall guys?

https://youtu.be/euTeBpM0nRQ

Sent from my SM-G930T using Tapatalk

 

[albano]

No I wouldn't be able to

I think that's a problem... sick/dying fish often like to wedge themselves into tight hiding places

As for the video... I'd recommend multiple pieces that could be removed without having to remove supports/braces.

 

[Hanger22reefing]

I think that's a problem... sick/dying fish often like to wedge themselves into tight hiding places

As for the video... I'd recommend multiple pieces that could be removed without having to remove supports/braces.

Thank you very much made me think how I should set it up

Sent from my SM-G930T using Tapatalk

 

[vio]

I think this 3 D "art" become , "Detritus Factory" , Hydrogen Sulfide problems.

 

[Hanger22reefing]

I think this 3 D "art" become , "Detritus Factory" , Hydrogen Sulfide problems.

I'm going to have a lot of water flow 2 gyro xf 280s on the sides 2 cp40 and one gyro xf130 in the back

Sent from my SM-G930T using Tapatalk

 

[marrone]

I think this 3 D "art" become , "Detritus Factory" , Hydrogen Sulfide problems.

This is a specific problem with those inserts, as usually you scrub them every so often they become loaded with detritus and other junk.

 

[vio]

Most of the water flow go on length , not to 3 D wall, not to mention , you need to miss just few spots to seal perfect, i will like to see that tank (Video) after one year, i mean in the back glass, if is NOT paint.

 

[r_jay]

I recently built a rockwall for my biocube and I'm looking forward to the results. I've heard many people say it's going to be a detritus trap and H2S, Nitrate factory but the proof will be in the pudding I think. My wall uses rubble pieces at max thickness of ~2" though so not a lot of room for anything too serious to start growing in spaces there but it is a 29 biocube so small changes could affect the system. If things go south then all I have to do is remove the wall and do some water changes to get back up and running. too bad I can't see what's happening behind the rock though (cause it's plastic) but I see lots of amphipods taking up residence there for now as I see them coming and going from the wall.