Acrylic cutting

[Loose tenticle]

Does anyone in brooklyn have any tools to cut acrylic, scored some 1/2 inch and would like to make a small frag tank. Anyone near zip code 11220, would be greatly apreciated.

 

[albano]

1/2" is really thick for a small frag tank

 

[mfs1855]

I have some 1/2" Lexan and a table saw. I'm going to buy a Lexan blade today. PM me your info. If it works I'll let you know. Happy to work with you to cut what you need. I'm in 11050 right over the queens border.

 

[Loose tenticle]

I have some 1/2" Lexan and a table saw. I'm going to buy a Lexan blade today. PM me your info. If it works I'll let you know. Happy to work with you to cut what you need. I'm in 11050 right over the queens border.

I have the acrylic, i just need to cut it. It was free so i cant complain. Im not looking to make a big one maybe 16x16x 12h. What part of queens? 646 584 5426


Sent from my iPhone using Tapatalk

 

[Loose tenticle]

Lexan is a bit tough to cut since its thinner, i can be wrong.

 

[samster]

Cut with fine tooth blade 140 teeth on table saw, but you'll need to clean up the edges before applying the Weldon

 

[vio]

cut with fine tooth blade 140 teeth on table saw, but you'll need to clean up the edges before applying the weldon

+1