Acrylic tubing for Kalkreactor

[spaulr]

Does anyone know where I can get Acrylic tubing with a 6"id x 24" length? Everyone sells it in 6' lengths. At that price ($75 @ tap plastics) I might was well go buy a premade one. Thanks...

 

[Anonymous]

I think I have some scrap, but may not be long enough. PM me if you want me to measure it tonight.

 

[Anonymous]

Are you thinking TAP is cheap FWIW, TAP should be your last resort when buying acrylic. Try Delvies in Salt Lake, US Plastic or Mc Master Carr. All are cheaper then TAP for the most part.

 

[Anonymous]

If you are looking for a short piece try a local vendor. You may pay more per ft, but you only get what you need.

 

[ChrisRD]

As mentioned already, if you can't get it locally try:
http://www.mcmaster.com/
They sell short lengths.