I just wanted to share some pictures of my latest project. We needed a light fixture for the dedicated Aussie Acan Tank so I decide to build one since I have been collecting lighting parts for a while. It is a 24” 4 bulb fixture made from aluminum square tubing and angle. Here are some pictures of my progress. I already have the reflectors cut and I just need to do the H cut and drill the hole for the clips then hang it in the greenhouse.
Here is a picture of the finished fixture. The next thing to work on is the stainless steel hangers.
Here is a picture of the tank it is lighting.
I am very happy with the way it turned out. The picture of our acan tank is over 3 months old and is pretty packed right now.
I have a new tank with a 30" x 30" footprint in the works now.
Here is a picture of the finished fixture. The next thing to work on is the stainless steel hangers.
Here is a picture of the tank it is lighting.
I am very happy with the way it turned out. The picture of our acan tank is over 3 months old and is pretty packed right now.
I have a new tank with a 30" x 30" footprint in the works now.
