Looking for WELD ON #3 or 4

[strgazr27]

If ANYBODY has any Weld On they want to sell Please let me know ASAP. I can Pick up today/tonight. Don't want to wait to order and have it delivered.

Let me know !

Thanks!

 

[qy7400]

If you cant find it over the weekend there's a plastics place in Farmingdale (by Adventureland) that stocks it, S and F Supply http://www.sfsupplies.com/default.sfs?action=contactus

 

[strgazr27]

Thanks Q,

Was hoping to find some by tonight. Working Mids and wanted to work on my Sump..

 

[qy7400]

Thanks Q,

Was hoping to find some by tonight. Working Mids and wanted to work on my Sump..

Give the LIRA forum on RC a try, http://reefcentral.com/forums/forumdisplay.php?s=&forumid=156 a few more locals

 

[kool-cat]

I just noticed something. This thing is leaking its smell out, even with a tightened cap... I put a fish bag and tied it in it and I can still smell the smell.. Someone trade me for it.

I have ips weld on 4. Problem is I dipped it with a damp brush. I tried it on my acrylic sump that I dont use and it seems to be ok. An acrylic sump that I have has a crack, so I placed another sheet to try and bond the crack with that piece. I dont see any crazing like I saw with the CPR bak pak, but there are bubbles trapped in between the test piece. Maybe I didn't apply enough pressure between the two pieces.. THe weld on should be ok, try using it on test piece before using it on your intended piece. I brought it to originally repair my cpr bak pak but that failed cause it was just taken out of service from my tank and must have absorbed moisture. I didnt give it enough time for it to dry so it crazed.. I tried repairing the bak pak before the sump. The sump seemes to be a success except for micro bubbles that formed in between the two pieces.

I think your like 15+ miles away from me. Im available all night, more or less..