Vortech Pumps suggestion

[House of Laughter]

not trying to be a Richard, but you sure that's 1/2" glass? can you shoot a photo with a tape measure on it? looks closer to 3/8th's

Again, not trying to be a hard ass here, just never seen it work.

Ecotech specs

Tank Range
Max Tank Thickness: 0.375 inches (9.5 mm)
Tank Size Range: 2.5-50+ gallons (9.5 ? 190 liters)
Clearance Needed Behind Tank: 2.25 inches (57 mm)

House

 

[MikeC]

The sides of my 120 are 3/8 but that is where I put my MP10
http://www.youtube.com/watch?v=LLyudzKZE8g&feature=youtube_gdata_player

 

[rhudgins]

Here you go

 

[reefs4life]

MP 10 holds just fine on my 1/2" glass

+1 I have one on the back wall of my 210 and I put one for a friend on the back of his 220...all is just fine

 

[mk1979]

all I well say is I tried it on 1/2 in glass one day the next day I went and bought a mp40
but if you have the mp10 already then try it just secure it so as not to damage it when not if it falls

 

[Tonyscoots84]

go with 2 mp 40's on a 48" tank and u will be good :yo:

 

[House of Laughter]

Here you go

That includes the bead of silicone - measure from the top of the glass - that's the actual glass size.

Cool if its working, I know every time I've tried glass or acrylic larger than 3/8's it falls off - tank volume has nothing to do with it - glass thickness is key. so it may very well fit on a tank that's 220, but no way is it 1/2" glass.

If you're inclined to entertain my diatribe, measure from the top pane of the glass and I would bet you a frag it's 3/8'ths

I am a man of my word.

House

 

[jgraz]

So the consensus seems to be that 3/8" is good to go.