• Why not take a moment to introduce yourself to our members?

xclusive252

55 gal salt water
Rating - 97.6%
124   3   0
The Ph in my tank is reading 7.87. I just calibrated the probe so I know its not that as I have 2 probes and both reading the same and both reading 10.0 when I place them in the cal. fluid. Is there a way to raise the Ph and not go crazy with a bunch of dosing or stuff like that?
 

vio

Advanced Reefer
Location
Manhattan
Rating - 98.9%
271   3   0
Do u dose Carbon? Vodka,Vinegar? running a long skimmer airline pulling air from outside,help the PH.
 
Last edited:

vio

Advanced Reefer
Location
Manhattan
Rating - 98.9%
271   3   0
If, u run Calcium reactor ,check CO2, u may not need so much ( CO2 bubbles per minute) also try to use Soda lime. Also increase water flow.
 

Dtech07

Experienced Reefer
Location
Lakewood
Rating - 0%
0   0   0
If your levels of alk, Ca, and Mag are correct in your MD and your probe is working correctly then I would look at increasing you Oxygen levels in your system.
Ways of doing it:
Ensure your skimmer is well maintained and clean
Adding a airstone to sump, fuge, or back of MD
Adjusting water levels or baffles in sump/fuge to create a better water falls
Small beaker with cork filled with 1 cup of Peroxide and a lead fishing shot (1oz), tubing placed in the center of cork and make air tight with tubing running to tank (sump/fuge) with De-fuser air stone.
Clean all pest algaes out
Trim back any Macro Algae's
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top