Ok, So here's the plan
I have a 140 Oceanic tank with two corner overflows, intakes are 1 1/4" with 1" durso tubes, returns are 3/4" ending in a "Y" into two Loc-Line nozzles with the 5/8" round nozzles, both returns will have anti-siphon tubes attached. the back of the tank has two 1" intakes with strainers five inches from the top. the returns are 3/4" exiting in multiple locations throughout the tank including the front corners and a few small pipes into the rocks themselves. Since i already own six Sedra 900's these are the pumps I'm gonna use. One for each overflow, and one for each return loop. With that i should get close to 20x's turnover i hope. i have two 20 x 20 x 20 glass tanks, i'll use one to hold my Precision Marine bullet 2 Skimmer. I'll throw all the heaters and probes in here. There will be a 80 micron bag to catch the big stuff. The other tank will be fed from the left overflow, this will be my Fuge.. The fuge light will be a 65w PC from Power Concepts. My plan is to use a 5" DSB using a 340 pound mix of live and non-live sand with 210 pounds of LR. My lighting will consist of two 250 watts DE HQI pentdants and a 4x 65 PC strip with 10k's and Blues. I'm curious to what you all think about setup, any suggestions please
I have a 140 Oceanic tank with two corner overflows, intakes are 1 1/4" with 1" durso tubes, returns are 3/4" ending in a "Y" into two Loc-Line nozzles with the 5/8" round nozzles, both returns will have anti-siphon tubes attached. the back of the tank has two 1" intakes with strainers five inches from the top. the returns are 3/4" exiting in multiple locations throughout the tank including the front corners and a few small pipes into the rocks themselves. Since i already own six Sedra 900's these are the pumps I'm gonna use. One for each overflow, and one for each return loop. With that i should get close to 20x's turnover i hope. i have two 20 x 20 x 20 glass tanks, i'll use one to hold my Precision Marine bullet 2 Skimmer. I'll throw all the heaters and probes in here. There will be a 80 micron bag to catch the big stuff. The other tank will be fed from the left overflow, this will be my Fuge.. The fuge light will be a 65w PC from Power Concepts. My plan is to use a 5" DSB using a 340 pound mix of live and non-live sand with 210 pounds of LR. My lighting will consist of two 250 watts DE HQI pentdants and a 4x 65 PC strip with 10k's and Blues. I'm curious to what you all think about setup, any suggestions please
