AGA megaflow kit

[mattstewart]

I have a dry fit of my plumbing in place for my new 90 gal aga megaflow setup. I puchased AGA's megaflow kit for the durso.

Do I glue the pieces of the megaflow kit together and do I glue the kit into the bulkheads?

Also after gluing everything, what's the best leak detection methods to make sure I didn't mess anything up, which I'm sure I will

Thanks,
Matt

 

[fungia]

you dont need to glue the pipe but some people prefer to glue with pvc glue to make it more secure. you can glue the kit into the bulkheads, you cant twist it on with threaded adapater because there is not enough room in the megaflow box to turn the durso.

there is nothing with the overflow to leak because it is all inside the tank. if there are any problems with the plumbing under the tank, you will see it right away. you can see or feel small leaks after a feel hours, if it is a little wet or if you see salt creep at a joint, there is a leak.

 

[mattstewart]

ok thanks, i start gluing tonight, and hopefully I'll be able to finish and get wet this week. after aquiring parts and building sump over the last year it'll be nice to put some water in this thing