Rapid led

[ecdragonz]

I just orderd my leds from www.Rapidled.com .I orderd 48 led dimable set for 385.00 .My order came to 550.00 for all the stuff I bought.
24 Cool White Cree XP-G R5 LEDs
24 Royal Blue Cree XP-E LEDs
48 Cree XP-E/XP-G Lenses ( 80 degree lenses)
4 Mean Well ELN-60-48D dimmable drivers
1 Arctic Alumina Thermal Adhesive or 1 tube of Thermal Grease
8 water resistant wire nuts
4 power cords
47 pieces of pre-cut wire
4 6" x 9" Black Anodized Aluminum Heat Sink
Awesome looking black anodized heatsink with extruded slots for a splash guard, fan and hanging kit!
3 4 3w LED Moonlight Kits
1 DIY 2 color dimming kit
Designed to be used with at least two Meanwell ELN-60-48D drivers to control dimming of two separate colors.

There will be 60 3 w led replacing my 2 250 metal halids

I think i am going to keep 2 of the 4 t5 i have on there.

I hope that it all works out . I use 850w now .I will be using 290w .

The first step is done its ordered.

We will se how it goes .i will keep every one up dated to see how they work out.

Scott
Ecdragonz

 

[Og Drogon]

Nice...... Every time I've seen Rapid led stuff on tanks they look awesome hope to see lots of pics.

 

[btldreef]

nice. good luck with it. any ??? just ask.... we are willing to help.

 

[nanofrank]

Rapid led is where i got my leds great customer service and the lights look just like mh.good luck

Sent from my N860 using Tapatalk

 

[pappy1299]

It's going to look great I just finished that build.

 

[darod850]

what's the difficulty level on these things? I've heard great things but I'm afraid I may not be able to put it all together.

 

[pappy1299]

There not that hard. You need a 100w soldering iron. And look at a few utube videos and u should be ok.

 

[Silkyslim]

There not that hard. You need a 100w soldering iron. And look at a few utube videos and u should be ok.

+1. I was trying to solder with a 45 w iron it was a pain in the a55.