Recent content by beemert

hope this isn't hijacking the post, but is there a source for a replacement aquabee pump? mine is getting weak. tia bruce

yes, it is clear. it is strange in that the whole output of the pump is reduced. thanx bruce

when you say in series, are the red and blue wires each going to their own light? this ballast runs 2 40w bulbs. is that what you are trying to light? wired like this? http://www.gelighting.com/na/business_l ... SLHTCP.pdf bruce

greetings i think my aquabee pump for my turbofloater multi has given up the ghost. has been running for 4 years or so. is very week and won't suck air anymore. i cleaned it, but that didn't help. if i put on the small inlet nozzle that it has always had on it, it won't pump at all. does...

greetings, i am in need of a ballast to run 2 55w CF and some new linear pin bulbs. does anyone have a source for lighting parts that has reasonable prices and reliable service/shipping? thanx bruce

yup, been there. i had to play with the curve of the flexible pipe coming to the sump and the angle at which the elbow enters the sump. i also supported the flexible pipe about midway. mine does not do it anymore, but i have the old version of the return, not the durso mod. can you adjust the...

i do not understand. the instructions say that it can be used submersible as well as external. there is a diagram of it being used in the sump. did i miss something? thank you, bruce

greetings, i wanted to write back and thank you all for help choosing a new pump. i ended up with the ocean runner. it ended up fitting just fine in the sump. it is very quiet and does not seem to run very warm. here is a picture, just because. thanx again bruce

greetings, this is about an inch long. swings in the current. i can't see anything inside it. sorry the picture is so blurry, it is way back in a cave. any ideas? thank you, bruce

thank you for the reply. you saved me some trouble, it won't fit. this will: http://www.marinedepot.com/md_viewItem. ... uct=RB3115 can i believe the "quiet" part of the name? seems a little strong. will be going in a drilled 54 corner. LR/fish/LPS/softies 4' head. am i heading in the right...

you folks are good, thank you for the sites. i was just about ready to check out, then i got to thinking about if this will fit in to my sump. i checked all the sites i could find, but none of them list physical dimentions. is there a way to find out how big this pump is? hoping this is as...

greetings, i am looking for an ocean runner 2500 (OR series) pump. all that i can find have a needle wheel conversion. does anyone know of an online dealer selling unmodified pumps? thank you, bruce

i really do appreciate all the replies, they have ben very helpful. this is what i did: http://www.etropicals.com/product/prod_ ... CatId=1369 if this works out, i will add the crabless package. thank you all !! bruce

how does this sound? http://www.etropicals.com/product/prod_ ... CatId=1368 bruce

greetings, i have a 55G corner bow that has been setup for 4 years. the youngest fish is 2.5yrs. the youngest coral is 2 yrs. some softies and an lps. i really like this tank and seems to be stable. the red legs that i bought a couple years ago are now gone. i never bought a "cleanup crew...