Recent content by tmncali

i tried it with netscape and it seems to work so i will just do it that way thanks tony

i tried again, and again, and this is what i get Already enrolled in Maco3? Click here i click there and i get this Authorization Required This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or...

im no longer able to access ""http://www.reefs.org/maco/course_3/index.html"" all i get is""Authorization Required This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't...

Where to Buy On-line No In Stores No 1-800-THE-SHACK Yes did you try calling the phone number to see if you could order it? tony

ive only seen it on ebay. havent heard anything about it. sorry tony

The Aqua Sea 2100, 2700, 3000, 3600, and 4700 gallon per hour pumps now all are available with the ampmaster motors. maybe ill do 2 2100's but then im talking 436$ for pumps. the 280$ for 1 3600 was allright, so i dont know. but 2100's run at .7 amps so 1.4 for the 2 is still less than 1 of...

that sucks tony

ampmaster 3600 which will give me 3900gph @0 head ill probbably be around 7' head so i will get 40gpm=2400gph. if the whole 1.5" wye into 2 1" pipes doesnt create a flow issue. 1.5*pi=4.71 1*pi=3.14 + 1*pi=3.14 = 6.28 maybe, im sure my math is off but i would think that 2 1" pipes would be...

well i dont know but i may be leaning towards the AMPMASTER 3600 just to make sure i have enough flow. thanks tony

Ritteri&Bubbles i guess its pretty much gonna end up being a personal choice for me eventually, huh? some people say yes, some no. but that is one of the things that come with gathering so many minds you can get so many different thoughts and ideas which is a good thing. except for me, when...

SPC, will that let me mantain the pumps max flow or will i still have restriction reducing the flow?

platylover, mariner, srbayless, thanks for the info. now what kind of effect will this have. my plumbing is 1" and on the web site it says to reduce flow by 40% for 1" so now im down to 1800 gph unless there is a way to wye the 1.5" out put into 2 1" pipes? and figure out what flow effect...

Here it goes, MagDrive 1200gph Water Pump 115 Volt 60 Hz 110 Watts - 1.6 amps 1100gpd at 4 feet MagDrive 1800gph Water Pump 115 Volt 60 Hz 145 Watts - 1.5 amps 1350gpd at 4 feet M12 10gph per Watt @4ft M18 9.3gph per Watt @4ft as P.A. website states now i maybe wrong but isnt it...

Ok people how about the berlin xl? itll be on a 140 gal, looking to possibly have 2 mag 12's running circ. if so, could i tie into one of those pumps lines to feed the berlin or would i need another pump. also could i be able to some day add a calc reactor to the other pump.. ie one item on each...

anyone ever try/or use this skimmer? The Beast's multi-chamber, multi-pass, venturi design totally "devours" dissolved organics in your tank for sparkling clear water! It's unusually low profile also allows convenient placement under almost any stand, and the output returns directly into...