Plumbing Question . .

[DaddyReefer13]

Has anyone or can anyone foresee an issue with plumbing chiller directly into a display as the return line? basically the water flow would be as follows.

Display overflow to sump ==> return Pump ==> Chiller ==> Display

 

[ZANYMASTER]

No problem except I would try to get any debris from getting into the chiller.

 

[motortrendz]

are you teeing off the return to the chiller? bc it needs to be a slower pace thru that then the return would be at full bore...

 

[ecchybridLE]

that should be how you plumb it. what kind of chiller and pump are you using? do you have a fuge in your sump? the more info the better. you have it going in the right direction for sure though. just dont't put more flow then the chiller is rated for. you could damage the temp probe.

 

[DaddyReefer13]

that should be how you plumb it. what kind of chiller and pump are you using? do you have a fuge in your sump? the more info the better. you have it going in the right direction for sure though. just dont't put more flow then the chiller is rated for. you could damage the temp probe.

i have a JBJ Arctica 1/5 chiller the pump i will be using is an eheim 1260 or maybe an eheim 1262. This will be for a 75 Gallon tank (30X24X24).