- Location
- Long island
Okay so I've been reef keeping for 5 years now and will soon be ready to make a leap to a larger system I've been nanoreefing so with that Said I think I have a good plan but have some questions so here goes:
Tank:deep blue rimless 57gal. Reef ready
Now first question can I run herbie style 1" main drain w/ gate valve and one of the 3/4" return holes as secondary or do I need to drill the glass to fit another 1" hole? Btw this tank has 1 drain 2 returns drilled into it. And I defiantly don't want to do a beans animal too complicated for me herbie method seems simple
Sump: I'm planning a 20 long 30"x12"x12" DIY baffles for 4 sections
1st: entry maybe a filter sock or some live rock(just to break splash)
2nd: skimmer chamber saltwaterconnection 120 cone
3rd:refugium cheato,mangroves,and halumeda(I know I spelled that wrong) and rock and sand With a coralife13" fuge light(t5 10000k&attinic) on reverse schedule as daylight
4th:return pump (tunze 1073.040 adjustable flow @700gph)
Also hanging above sump will be a BRS( bulkreefsupply) dual reactor for 1 section for carbon 1 for GFO with a Maxijet 1200 to feed it out of skimmer section and dump into fuge
Flow: 1 ecotech vortech mp10Wes, also 1 tunze turbelle 6025(660gph) in a tunze nano rock( to hide at base of rockscape for less sediment in back of tank also have 3 existing koralias 2- 240gph and 1-425gph if needed I also plan on getting the hydor smart controller for koralias to work on pulse mode or wave or whatever it should be out this June
Light: I like halides not a led guy so probably 250 or better halide with t5 or some pc's for attinics gonna hang it so not to ruin rimless look
Rock: 50lbs dry dead rock to be able to stack and glue as I please
Sand: 60lbs dead sand I'll seed from my existing system
Also planning 2 dosing pumps 1 for ca 1 for mg
Also Jbj top off w/ Madison float switches(more reliable than stock IMO) I'll use this for running kalk if needed
Already have a 5 stage ro/di unit thanks BRS awesome site
And after all is said and done I want to buy (if any budget left) an apex aquacontroller and possibly another mp10Wes if needed
So that's pretty much it I don't think I forgot any thing I was planning any advice comments suggestions are all welcome infact encouraged I need all the help I can get
Thank you all so much
Tank:deep blue rimless 57gal. Reef ready
Now first question can I run herbie style 1" main drain w/ gate valve and one of the 3/4" return holes as secondary or do I need to drill the glass to fit another 1" hole? Btw this tank has 1 drain 2 returns drilled into it. And I defiantly don't want to do a beans animal too complicated for me herbie method seems simple
Sump: I'm planning a 20 long 30"x12"x12" DIY baffles for 4 sections
1st: entry maybe a filter sock or some live rock(just to break splash)
2nd: skimmer chamber saltwaterconnection 120 cone
3rd:refugium cheato,mangroves,and halumeda(I know I spelled that wrong) and rock and sand With a coralife13" fuge light(t5 10000k&attinic) on reverse schedule as daylight
4th:return pump (tunze 1073.040 adjustable flow @700gph)
Also hanging above sump will be a BRS( bulkreefsupply) dual reactor for 1 section for carbon 1 for GFO with a Maxijet 1200 to feed it out of skimmer section and dump into fuge
Flow: 1 ecotech vortech mp10Wes, also 1 tunze turbelle 6025(660gph) in a tunze nano rock( to hide at base of rockscape for less sediment in back of tank also have 3 existing koralias 2- 240gph and 1-425gph if needed I also plan on getting the hydor smart controller for koralias to work on pulse mode or wave or whatever it should be out this June
Light: I like halides not a led guy so probably 250 or better halide with t5 or some pc's for attinics gonna hang it so not to ruin rimless look
Rock: 50lbs dry dead rock to be able to stack and glue as I please
Sand: 60lbs dead sand I'll seed from my existing system
Also planning 2 dosing pumps 1 for ca 1 for mg
Also Jbj top off w/ Madison float switches(more reliable than stock IMO) I'll use this for running kalk if needed
Already have a 5 stage ro/di unit thanks BRS awesome site
And after all is said and done I want to buy (if any budget left) an apex aquacontroller and possibly another mp10Wes if needed
So that's pretty much it I don't think I forgot any thing I was planning any advice comments suggestions are all welcome infact encouraged I need all the help I can get
Thank you all so much