Tunze 6000 + Single Controller + Magnet + Light Sensor

[fritz]

Selling my Tunze 6000 with single controller, magnet holder and light sensor. It's 1-2 months old. It's overkill in my tank.

Asking $300.

 

[scarf_ace1981]

fritz what size tank was it on?

 

[fritz]

55 Gallon. It creates great flow but it's linear flow no matter what I bounce it off of.

I guess I'd sell it for $300 flat.

 

[DevIouS]

PM sent~

 

[fritz]

Sale pending to Mr. Dvs1

 

[fritz]

Back on the market.

This is still up for grabs.
It's was used for only about a month, not even long enough to get some coraline on it!

$300
Tunze 6100 (transfer is a 6000)
Single Controler
Magnet
Light Sensor

 

[herman]

Fritz,

If the flow was overkill you can tone it down even more. On the control box there is a little hole with a screw. This will adjust the max output between 30 and 100%. If you turn down the knob and use it in conjunction with the controller you can achieve significantly lower flow.

Try that b4 you sell it. You know you will upgrade that tank soon And when you do you can turn the knob up again:Up_to_som

 

[DEEPWATER]

This is still up for grabs.
It's was used for only about a month, not even long enough to get some coraline on it!

$300
Tunze 6100 (transfer is a 6000)
Single Controler
Magnet
Light Sensor

mrchirskim ,,Is ooking for one just like this ,give hime a pm

 

[Pedro]

Herman,

I thought that the instructions said not to turn the driver down or it can be damaged. But i do recall reading that it might not be an issue with the controllable pumps. I think that only applies to the 6080 and such. Is this right?

Also if it's too much flow, you can get the 6200 screens for them, that would make the flow even more diffused. That's what i did with mine.

 

[fritz]

-bump-