- Location
- Bronx, NY
So as a few of you probably notice i recently upgrade to a red Sea max s-650 the first tank they sent me had a cracked euro brace, they agreed to send me another through warranty so i sold the damaged one since it was repairable. The second one arrived and a bit of the plastic on the overflow is a little messed up and b the cover for the rear chamber was broken in 2 i asked them to just send me the overflow section and i would cut out and replace it myself to reduce the amount of time it would take and they basically said it was quicker and easier to just send another replacement. Thank god it was in perfect condition and now that i have it up and running i have time to list the second one.
I'm looking to get $1000 OBO. Don't be afraid to send me offers but please don't low ball a ridiculous offer to me, just realize that the 3 starphire panels alone in raw glass would run you $700+ and to have a similar tank built considering the circulation chamber/top off chambet/overflow would cost you over $2k.
I'll include anything they sent as duplicates with it.
What's included:
Drain pipes to connect to the rear of tank.
The c-channel to hide pump/lighting wiring behind tank (also pictured above).
The connections for the circulating chamber. Suction covers, connection/jet nozzles for the circulating pumps (red sea uses sicce but they'll fit any pump with the same thread size), the nozzle for the return line.
The leveling/neoprene foam board with plumbing cut out to rest between the tank and stand
Heavy duty plastic used for the floor of the inside of the cabinet.
Splash guards for inside the stand.
And of course the tank itself. I'll post the pictures with the extent of the damage first, what it looks like covered and the rest of the tank after.
Damaged overflow:
Damaged overflow with grates covering:
Zoomed out a bit:
Cracked cover:
Everything put together:
Crated tank:
Everything packed inside overflow:
Right side:
Left side:
Rear:
Front:
Drains/return/top off chamber:
Here's some pictures of how the tank looks set up (the one i set up):
Sent from my SM-N910P using Tapatalk
I'm looking to get $1000 OBO. Don't be afraid to send me offers but please don't low ball a ridiculous offer to me, just realize that the 3 starphire panels alone in raw glass would run you $700+ and to have a similar tank built considering the circulation chamber/top off chambet/overflow would cost you over $2k.
I'll include anything they sent as duplicates with it.
What's included:
Drain pipes to connect to the rear of tank.
The c-channel to hide pump/lighting wiring behind tank (also pictured above).
The connections for the circulating chamber. Suction covers, connection/jet nozzles for the circulating pumps (red sea uses sicce but they'll fit any pump with the same thread size), the nozzle for the return line.
The leveling/neoprene foam board with plumbing cut out to rest between the tank and stand
Heavy duty plastic used for the floor of the inside of the cabinet.
Splash guards for inside the stand.
And of course the tank itself. I'll post the pictures with the extent of the damage first, what it looks like covered and the rest of the tank after.
Damaged overflow:
Damaged overflow with grates covering:
Zoomed out a bit:
Cracked cover:
Everything put together:
Crated tank:
Everything packed inside overflow:
Right side:
Left side:
Rear:
Front:
Drains/return/top off chamber:
Here's some pictures of how the tank looks set up (the one i set up):
Sent from my SM-N910P using Tapatalk
Last edited:
