iconoclast
Tired Member
- Location
- Brooklyn: near brooklyn college
-1" inline
-no built in temperature control (I have a ranco though, see below)
There is no brand name on the outside of this chiller.
The compressor is Copeland, model# ARE37C3E-IAA
Volts 115
Single Phase
RLA 7.2
LRA 29
AMPS 7.1
BTU 3750
Watts 600
I believe this puts the chiller at 1/3 HP or just about when compared to other chillers.
I broke down my larger tank this summer and didn't need to use the chiller.
250$ for chiller
If you need a temperature controller I can add the wired Ranco for 70$, it is new. model# etc-111000-000
With Ranco: 320$
I can throw in 2 right angle 1" threadxhosebarb fittings and some black tubing that fits it.
I also have various pumps that would be suitable for circulation.
-no built in temperature control (I have a ranco though, see below)
There is no brand name on the outside of this chiller.
The compressor is Copeland, model# ARE37C3E-IAA
Volts 115
Single Phase
RLA 7.2
LRA 29
AMPS 7.1
BTU 3750
Watts 600
I believe this puts the chiller at 1/3 HP or just about when compared to other chillers.
I broke down my larger tank this summer and didn't need to use the chiller.
250$ for chiller
If you need a temperature controller I can add the wired Ranco for 70$, it is new. model# etc-111000-000
With Ranco: 320$
I can throw in 2 right angle 1" threadxhosebarb fittings and some black tubing that fits it.
I also have various pumps that would be suitable for circulation.
