Have more that the one tank, tried to list them together - mess as a result, will do separate threads, linked here.
Any advice on improvement is welcome!
All tanks are subject of the next requirements and limitations:
1. This low end of the hobby: cheap, small space (height limit too), low tech (no means for a high tech), no place for a high-end DIY too. Can't say low cost after all what was spent. You get an idea. :roll:
2. No drilling and 2-level sumps, because of point 1, can't afford and can't risk.
3. Relatively low light, same reason. But with sun supplementation.
4. Here, where I'm, not much a choice to set a tank and fill it with what I want. So I went an opposite way, and bought what was interesting, available and affordable, and make the best possible (see p.1 ) accommodations for them. Some of them better to keep separately, and I ended keeping a few tanks, instead of one.
5. The smaller tank - the better. I tired to be a water carrier and cleaner, and have the trashcan as a centerpiece across the display tank. 5-6g are ideal, especially observable from the 3 sides, as the Nano-Cube.
Disclaimer: most are alive and well, including cleaner wrasse, non-photosynthetic corals, babies Tridacna and Christmas tree rock. Incompatible fish appeared to be compatible.
Would like to reduce quantity of the half-empty tanks,
re-arrange inhabitants in the more optimal way, still don't know how.
So far incompatible groups of inhabitants, kept in separate quarters are:
1. Large, relatively not reef-safe fish. Messy, requiring good filtration and skimming. 90g tank.
2. Non-photosynthetic corals, requiring high food density and good filtration with water changes. Kept in 6g Nano Cube.
3. Common reef, higher light, than any other tank. Most demanding inhabitants are: 2 babies T. maxima, big Christmas tree rock, purple-tipped anemone (condylatris?). Others - mostly LPS, few softies and some macroalgae. 10g, can be 20.
4. Large inflated LPS corals: 7" scolymia, 5.5 " cynarina, 4"+ Symphyllia valenciennesii (best guess). Planned for 90g, but too risky for an inflated single-polyped corals. Now in 4.5g shallow container, high light (sun), were and could be in 20g.
5. Sexy shrimps couple, because of the size and their safety. 2.5g pico. Would like to add them to any other tank, afraid that it will be the last time I saw them.
6. Temporary sponges tank, the last finding: ball sponge is much better at lower temperature than other tanks. 3.5g container at 76F.
All tanks are under construction all the time, until with your help I'll find the optimal setup and set them with permanent place, stands and plumping.
Now pictures.
What I have now:
90g tank for a large fish:
side sump 15g, filled 8" for ASM G-3 skimmer, fuge - 5g bucket:
Nano-Cube 6g with non-photosynthetic and low light corals:
10g mixed reef and 4.5g large LPS tanks:
Sexy shrimps 2.5g pico:
Sponges 3.5g container (old photo, now sponges and macroalgae only):
Already ready thread with 90 and 10g tanks specifications, is on the other forum. http://thereeftank.com/forums/showthread.php?t=91647
Problems with non-photosynthetic tank is here: http://www.reefs.org/phpBB2/viewtopic.php?t=98706
Problems with 90g and 10g tanks (setup, plumbing and filtration) will be here: http://www.reefs.org/phpBB2/viewtopic.php?t=98732
Any advice on improvement is welcome!
All tanks are subject of the next requirements and limitations:
1. This low end of the hobby: cheap, small space (height limit too), low tech (no means for a high tech), no place for a high-end DIY too. Can't say low cost after all what was spent. You get an idea. :roll:
2. No drilling and 2-level sumps, because of point 1, can't afford and can't risk.
3. Relatively low light, same reason. But with sun supplementation.
4. Here, where I'm, not much a choice to set a tank and fill it with what I want. So I went an opposite way, and bought what was interesting, available and affordable, and make the best possible (see p.1 ) accommodations for them. Some of them better to keep separately, and I ended keeping a few tanks, instead of one.
5. The smaller tank - the better. I tired to be a water carrier and cleaner, and have the trashcan as a centerpiece across the display tank. 5-6g are ideal, especially observable from the 3 sides, as the Nano-Cube.
Disclaimer: most are alive and well, including cleaner wrasse, non-photosynthetic corals, babies Tridacna and Christmas tree rock. Incompatible fish appeared to be compatible.
Would like to reduce quantity of the half-empty tanks,
re-arrange inhabitants in the more optimal way, still don't know how.
So far incompatible groups of inhabitants, kept in separate quarters are:
1. Large, relatively not reef-safe fish. Messy, requiring good filtration and skimming. 90g tank.
2. Non-photosynthetic corals, requiring high food density and good filtration with water changes. Kept in 6g Nano Cube.
3. Common reef, higher light, than any other tank. Most demanding inhabitants are: 2 babies T. maxima, big Christmas tree rock, purple-tipped anemone (condylatris?). Others - mostly LPS, few softies and some macroalgae. 10g, can be 20.
4. Large inflated LPS corals: 7" scolymia, 5.5 " cynarina, 4"+ Symphyllia valenciennesii (best guess). Planned for 90g, but too risky for an inflated single-polyped corals. Now in 4.5g shallow container, high light (sun), were and could be in 20g.
5. Sexy shrimps couple, because of the size and their safety. 2.5g pico. Would like to add them to any other tank, afraid that it will be the last time I saw them.
6. Temporary sponges tank, the last finding: ball sponge is much better at lower temperature than other tanks. 3.5g container at 76F.
All tanks are under construction all the time, until with your help I'll find the optimal setup and set them with permanent place, stands and plumping.
Now pictures.
What I have now:
90g tank for a large fish:
side sump 15g, filled 8" for ASM G-3 skimmer, fuge - 5g bucket:
Nano-Cube 6g with non-photosynthetic and low light corals:
10g mixed reef and 4.5g large LPS tanks:
Sexy shrimps 2.5g pico:
Sponges 3.5g container (old photo, now sponges and macroalgae only):
Already ready thread with 90 and 10g tanks specifications, is on the other forum. http://thereeftank.com/forums/showthread.php?t=91647
Problems with non-photosynthetic tank is here: http://www.reefs.org/phpBB2/viewtopic.php?t=98706
Problems with 90g and 10g tanks (setup, plumbing and filtration) will be here: http://www.reefs.org/phpBB2/viewtopic.php?t=98732