Jabeo controller for APEX

[lrasser]

I purchased the Jabeo control box for the apex rather then making my own harness. For the price it's great but like all APEX products there are no installation instructions and since its new I can't find anything on it. Does anyone have one? I'm looking to find out how to get the apex controller to access it. How do I set up the module? HELP !!!!!

 

[cmantis]

Set it up as variable device.

 

[lrasser]

Not sure how to do that. This is my issue.

 

[cmantis]

I haven't done it myself but know people that have will try to ask for you.

 

[lrasser]

That would be greatly appreciated. I'm at a loss. Any help would be awsome.

 

[jcs11236]

Go to apex forum. They have tons of threads how to set up. Step by step details.

 

[lrasser]

If your referring to an apex forum i here i can't find one.

 

[dirtinla]

Neptunesystems.com. Under support and community forum

 

[jcs11236]

Google. Control jebao thru apex. Million threads show up. Explain step by step info

 

[lrasser]

all they explain is what to use for code but none of them say where that code is going. I'm getting ready to just sell it. I've spent hours trying fond this out with no resolve. APEX has got to be the worst company for software I've ever dealt with. I can find endless amounts of examples to use but NOBODY says how to enter the code and where. outlet? virtual outlet (no idea what that even is), module setup etc? which one and how?

 

[offdahooklikeoj]

Firstly, are you using the original apex interface or fusion? DO you have a full apex or apex jr? If you have a apex junior you will need to get a VDM Module. You need to control the jebao pump (whatever model) through one of the apex variable speed ports.

 

[lrasser]

I'm using a full Apex with a V1/V2 port. I don't have fusion yet since I need to upgrade the software and need to get about a 75ft cable to do so. I'm currenty on wifi and everything i read says it can't be done that way. I already have it hooked up through the variable speed port. I just don't know how to access that port through the interface.

 

[offdahooklikeoj]

I justed needed to know if it was fusion or not so I can try to explain to you how to find the outlets. If you set everything up correctly, which I assume you did you should have four variable speed outlets VarSpd1_I1, VarSpd2_I2, etc, these will either be located on your dashboard, or if you click the edit button on your dashboard it they may be in your unused tiles/icons area. Just drag the VarSpd1 tile and put it on the dashboard and that will be the outlet you have to program.

 

[lrasser]

THANKS !!!! thats exactly what i was trying to figure out. Everything kept just saying use an "outlet". We'll my thought was why would I configure an outlet for this? So not all i have to do i point that var speed outlet at a profile and config it correct? Not it all makes sense. Just needed the first piece to the puzzle.