Bubble Magus nac7

[oonycxwilloo]

Very nice performance for two days. I have a 75G with a 40G sump, just two fish right now and am thinking of getting a new skimmer.

Where did you end up buying it from?

Have you or anyone else verified the how many watts the pump consumes?

I ended up buying from ebay...

28W, 220V 50Hz /110V 60Hz

very nice will! god i cant wait to get mine now. someof those other skimmer take a few days to start producing anything but yours is doing great within 24-48 hours. so would you say overall are you glad you picked this one? did you have to do any small mods to it yet or tips you found out so far?

Overall I'm SUPER satisfied with this skimmer and would highly recommend this skimmer to anyone looking for a new skimmer that this skimmer can support. No mods needed, set-up was easy, but like I said the instructions were HORRIBLE. If you or anyone needs help setting it up, feel free to give me a call or pm and I will gladly guide you through it.

 

[batt600]

Im going to help my friend mod his nac7 cone skimmer with a Sicce PSK-2500 pump with a mesh mod and see how that works . Its a moster now lets see if we can turn it into a beast . The SCFH on the stock pump is only 21 SCFH the sicce is more flow and with the mesh mod will get 35 SCFH if eveything goes well he will buy the Red Demon Pinwheel that will put us at 40-45 SCFH .So we will see .

 

[ryangrieder]

thanks alot man. i just checked usps and it looks like in a few days ill be getting mine. if i have issues ill be sure to let you know. was finding its sweet spot easy or a pain in the butt like most...

 

[oonycxwilloo]

Im going to help my friend mod his nac7 cone skimmer with a Sicce PSK-2500 pump with a mesh mod and see how that works . Its a moster now lets see if we can turn it into a beast . The SCFH on the stock pump is only 21 SCFH the sicce is more flow and with the mesh mod will get 35 SCFH if eveything goes well he will buy the Red Demon Pinwheel that will put us at 40-45 SCFH .So we will see .

Great! let me know how that goes. If it goes well, maybe I'll do it too, now you keep us posted

 

[batt600]

Will do. Will post pics of the finsh product

 

[oonycxwilloo]

Patiently waiting..

 

[autoponicz]

i have been running a nac7 for about 6 months in my 20g...i agree its been working great....


not much skimmate cuz cup was cleaned the day before and its a 20g...hehe

 

[oonycxwilloo]

Nice!

 

[batt600]

Ok just did the mod on the NAC7 with a Sicce PSK-2500 Pump with mesh mod . I used a bulk head fitting for the hole in the skimmer. Dont now what size bulk head but it take 3/8 pcv tubing. And the pump screws right in to the bulk head . Used 1 90 deg elbo with inside threaded and screwed on the bubble plate to the elbo . You can see it in the pics. I can tell you that is putting out alot more micro bubbles then before you can see in the pics and the mesh wheel not broken in yet.

 

[batt600]

Bump

 

[oonycxwilloo]

wow.. impressive/creative. Any pics on the collection? How much did you get the new pump for?

 

[batt600]

I bought it from a member here for $50.
I had redo the plumbing and raise the bubble plate more. I put a union on the pump for eazy removel its doing great getting nice thick foam cup obout 1/4 full right now