ProCal Calcium Reactor Help

[brick-brothers]

you will see air in top part of chamber

Ok cool

Sent from my SM-F916U1 using Tapatalk

 

[ravi197699]

you can be little creative if you like and add float switch and solenoid valve, if float switch drops it will open the solenoid valve and release the co2 and close when co2 is gone and water rises, just a suggestion..

 

[brick-brothers]

you can be little creative if you like and add float switch and solenoid valve, if float switch drops it will open the solenoid valve and release the co2 and close when co2 is gone and water rises, just a suggestion..

Ok cool, thanks bro

Sent from my SM-F916U1 using Tapatalk

 

[ravi197699]

Ok cool, thanks bro

Sent from my SM-F916U1 using Tapatalk

anytime

 

[brick-brothers]

anytime

Question, this is the program I got off of brs YouTube video for the Co2. I'm not sure if my apex is controlling it right

Sent from my SM-F916U1 using Tapatalk

 

[ravi197699]

Question, this is the program I got off of brs YouTube video for the Co2. I'm not sure if my apex is controlling it right

Sent from my SM-F916U1 using Tapatalk

are you controlling the co2 with ph probe and is it calibrated?

 

[brick-brothers]

are you controlling the co2 with ph probe and is it calibrated?

I finally figured it out. The float wasn't moving freely like it was supposed too. I had to loosen up the screw. Far as the ph, it was off because the co2 wasn't able to escape once I put the valve on the vent line.

Sent from my SM-F916U1 using Tapatalk

 

[ravi197699]

are you controlling the co2 with ph probe?

I finally figured it out. The float wasn't moving freely like it was supposed too. I had to loosen up the screw. Far as the ph, it was off because the co2 wasn't able to escape once I put the valve on the vent line.

Sent from my SM-F916U1 using Tapatalk

awesome, good luck

 

[brick-brothers]

awesome, good luck

Thanks Bro

Sent from my SM-F916U1 using Tapatalk

 

[ravi197699]

Thanks Bro

Sent from my SM-F916U1 using Tapatalk

anytime bud