Acrylic & Mesh Tank Cover - Reefs.com

Home  / Forums  / Global Forums  / DIY (Do It Yourself!)  /  Acrylic & Mesh Tank Cover
Reply
KathyC's Avatar
KathyC is offline
Moderator
Join Date: Jul 2006
Posts: 13,954
Acrylic & Mesh Tank Cover
03-06-2007, 12:48 AM
  #1  
About a month ago I built a tank cover to keep my Wrasse's from carpet surfing...
the idea for the design had come up in this link thread that Jon Hale had started:
https://www.manhattanreefs.com/forum/...ank-cover.html

When I built mine I added doors to make target feeding my Sun corals and others
easier, while keeping most of the tank covered so I wouldn't have to try & catch
flying wrasses while holding a turkey baster in one hand...
Down side was I ended up with a shadow 1 1/2" wide across my rocks. That wasn't
acceptable, so I came up with a new plan.

I visited an acrylic fabricator and we did some brainstorming on the best size of plexi
to use that wouldn't sag under the metal halides & glues to use.

This cover was built for my 33g Oceanic cube (haven't gotten around to posting a tank
thread for this one yet..do have all the pics..one of these days..), where I had to build
'around' the OFB & scwd returns. When I build the next one for my 75g, I will post the
pics here.


Here is what we came up with and how it was made.

Parts:
1/8" x 3/4" x 48" strips of plexiglass
3/16" x 3/4" x 48" strips...
# 3 Weldon and applicator bottle
Craftics # 33 Clear Thickened Acrylic Cement
Acrylic hinges




First I measured & cut the frame using the 3/4" plexi. I designed this to sit on the 'lip'
inside the tank. When measuring I deducted 1/16" on all sides to give me enough wiggle room
for expansion due to the lighting.




Then I flipped the frame upside down and glued 1 1/2" strips of the 1/8" plexi to the UNDERSIDE
of the frame to hold it together. The fabricator fellow said glueing the edges to themselves
wouldn't hold well enough and this was his suggestion. (do remove the blue protective covering
before gluing!)



Here is the door panel




Next I turned the frame right side up and had by now removed all of the protective blue
covering. Note the 2 hinges in the upper left.




Next came adding the netting to the frames. I used the Craftics # 33 thickened glue - the
instructions on this tell you to lightly sand the 2 pieces of plexi..did that. I cut a piece of
netting
slightly larger than the main frame and sandwiched it between the 1/4" thick lower using the
1/8" plexi as the top of the 'sandwich' after running a bead of the thickened
cement along the frame. I used clothespins as clamps...

You will want to cut your 1/8" strips so they butt against each other all the way around
the frame. Also cut them so they don't match the same overlap pattern as the 1/8" pieces
you used to bond the frame together. The frame will be stronger this way.

Also be sure to carefully install this 1/8" upper piece so that it lines up perfectly with the lower
piece. Otherwise you will be sanding the edges so it will fit inside the lip of your tank.




Within about 30 minutes the glue was solid enough to remove the clothes pins & trim away the
excess netting. (btw..the netting is black, not sure what photographic anomaly is responsible
for the way it came out in the pics...)




The hinges are difficult to see (that was the point...)and they need to be glued with
Weldon # 3 with the LUMPY side DOWN. I put a weight on them until they dried. Note: I chose
to use 3/4" plexi for the frame as that was the size of the hinges. Piano type hinges are also
available in acrylic. The ones I used are 1 1/2" long.




Here are pics of the finished cover. I added a small handle made from 2 extra pcs of the 1/4"
plexi. I suggest you attach your handle to the door edge and not the outside frame as I did..I
guess I was really tired (or high from the glue fumes...) by that point since I attached my handle
to the outside frame...where it serves absolutely no purpose what so ever...





I'm very happy with the way it turned out as there are NO shadows on my rockwork with this
new frame. (I should have tightened the netting on the door portion...)
I will be moving that handle to the right location..one of these days..and I will post a pic of the
tank with the cover on it..soon.
Thanks for looking!
__________________
The beginning is the most important part of the work -Plato

Last edited by KathyC; 03-21-2007 at 01:58 AM.
 
tosiek's Avatar
tosiek is offline
Senior Member
Join Date: Aug 2006
Posts: 2,976
03-06-2007, 02:26 AM
  #2  
nice work Kathy =0)

Did you overstretch the netting on the main part of the frame? and if ya did are you noticing any warping? Something small i ran into with my netting on my frame. Having them threads doesn't help either because they end up shrinking when wet then heated under the MH.

Can't wait to see pics of this installed!
 
jhale's Avatar
jhale is offline
ReefsMagazine!
Join Date: Oct 2004
Posts: 15,399
03-06-2007, 02:26 AM
  #3  
awesome "how to" Kathy
 
SethKim's Avatar
SethKim is offline
Senior Member
Join Date: Jan 2007
Posts: 279
03-06-2007, 02:50 AM
  #4  
Great work KathyC...

I want to make something similar, except I'm afraid it will bow over time, let me know how it holds up!!!

Sincerely,
 
Awibrandy's Avatar
Awibrandy is offline
Senior Member
Join Date: Apr 2003
Posts: 10,121
03-06-2007, 10:18 AM
  #5  
You go Girl.
__________________
Yo soy Boriqua! Pa' que lo sepas!!
 
scarf_ace1981's Avatar
scarf_ace1981 is offline
Senior Member
Join Date: Feb 2006
Posts: 5,057
03-06-2007, 10:46 AM
  #6  
nice work kathy. that is just genius right there.
 
aaron23's Avatar
aaron23 is offline
!THE ULTIMATE REEFER!
Join Date: Feb 2006
Posts: 2,966
03-06-2007, 10:48 AM
  #7  
oooooo looks sweet!!
 
LeslieS's Avatar
LeslieS is offline
Senior Member
Join Date: May 2006
Posts: 2,015
03-06-2007, 10:59 AM
  #8  
great explanation Kathy!
 
KathyC's Avatar
KathyC is offline
Moderator
Join Date: Jul 2006
Posts: 13,954
03-06-2007, 12:18 PM
  #9  
Quote:
Originally Posted by tosiek View Post

Did you overstretch the netting on the main part of the frame? and if ya did are you noticing any warping? Something small i ran into with my netting on my frame. Having them threads doesn't help either because they end up shrinking when wet then heated under the MH.

Can't wait to see pics of this installed!
Thanks guys & gals!!

No need to stretch the netting, though for the next one I will try a hair dryer to flatten out the folds in the netting before I install it.
Haven't seen any shrinking when wet or issues with the lights on either, even on the original frames I made.

It is already on the tank...but I have to remove the new canopy to take the pic..and I'm being lazy about that..maybe later today.
__________________
The beginning is the most important part of the work -Plato
 
ellebelle's Avatar
ellebelle is offline
Lissa
Join Date: Jul 2006
Posts: 3,001
03-06-2007, 12:32 PM
  #10  
Yay Kathy! Good tutorial!
__________________
Reef tanks are a cruel mistress.

My 75g Tank (ran 9/08 - 10/09)
40br Upgrade (ran 12/07 - 9/08)
29g Tank Log (ran 11/06 - 12/07)

The best advice I can give to any new reefer: FWE every frag you get.


 

Reply
Thread Tools
Display Modes


LinkBacks (?)
LinkBack to this Thread: https://reefs.com/forum/diy-do-yourself/22953-acrylic-mesh-tank-cover.html
Posted By For Type Date
Where can you buy acrylic? This thread Refback 01-17-2015 11:30 PM
Mesh top using acrylic frame? - Do It Yourself - Nano-Reef.com Forums This thread Refback 01-07-2015 12:41 PM
Lemon's tank! - Page 70 - Members Tank & Specs - Singapore Reef Club This thread Refback 09-20-2014 08:57 PM
Convert HD-SDI video inputs to Clear QAM cable output This thread Refback 04-29-2014 01:10 AM
http://aksprojekt.pl This thread Refback 04-22-2014 09:08 PM
Acrylic & Mesh Tank Cover - Page 2 - Reefs.com This thread Refback 10-12-2013 12:54 AM
Tank Cover Building Demonstration! - Page 3 - Reefs.com This thread Refback 10-05-2013 08:00 PM
Acrylic & Mesh Tank Cover - Page 13 - Reefs.com This thread Refback 10-05-2013 07:59 PM
DIY net top for rimless tanks? I might have an idea... - Do It Yourself - Nano-Reef.com Forums This thread Refback 10-04-2013 03:49 PM
DIY net top for rimless tanks? I might have an idea... - Do It Yourself - Nano-Reef.com Forums This thread Refback 09-13-2013 12:24 AM
Dymax IQ3 1.2 gallon planted nano This thread Refback 07-24-2012 09:32 PM
Clown jumped from tank - Page 2 This thread Refback 06-18-2012 04:16 PM
Tank covers?? - The Reef Tank This thread Refback 02-05-2012 02:25 PM
Brasil Reef - Fórum de Aquário - Aquarismo - Marinho, Corais e Água Doce • Exibir tópico - Proteção para Wrasses Voando This thread Refback 12-07-2011 12:17 PM
Acrylic/Mesh Tank Covers This thread Refback 10-06-2011 08:11 PM
Tank covers?? - The Reef Tank This thread Refback 10-13-2010 09:15 PM
Brasil Reef - Fórum de Aquário - Aquarismo - Marinho, Corais e Água Doce • Exibir tópico - Proteção para Wrasses Voando This thread Refback 09-22-2010 04:55 PM
Dymax IQ3 1.2 gallon planted nano This thread Refback 05-30-2010 02:31 PM
Screen for top - Reef Central Online Community This thread Refback 10-02-2009 01:46 PM
Reef Central Online Community - Screen for top This thread Refback 09-13-2009 02:24 AM
Reef Central Online Community - Screen for top This thread Refback 09-12-2009 08:29 PM
Reef Central Online Community - Screen for top This thread Refback 09-12-2009 06:24 PM
The New Jersey Reefers Club - Where can you buy acrylic? This thread Refback 11-30-2008 06:27 PM
glass tops or egg crate - Boston Reefers Society Online Community This thread Refback 10-14-2008 06:38 PM
glass tops or egg crate - Boston Reefers Society Online Community This thread Refback 10-13-2008 05:32 PM
glass tops or egg crate - Boston Reefers Society Online Community This thread Refback 10-13-2008 02:04 AM
The New Jersey Reefers Club - Where can you buy acrylic? This thread Refback 08-11-2008 12:38 PM
Clown jumped from tank - Page 2 This thread Refback 07-03-2008 05:51 PM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 11-03-2007 12:11 PM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 11-03-2007 11:41 AM
Acrylic/Mesh Tank Covers This thread Refback 11-02-2007 03:59 AM
Acrylic/Mesh Tank Covers This thread Refback 11-01-2007 10:53 AM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 11-01-2007 09:32 AM
Acrylic/Mesh Tank Covers This thread Refback 10-30-2007 10:49 PM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 10-30-2007 10:01 PM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 10-30-2007 09:58 PM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 10-30-2007 09:56 PM
The New Jersey Reefers Club - Recent Posts This thread Refback 10-30-2007 09:47 PM
The New Jersey Reefers Club - Acrylic/Mesh Tank Covers This thread Refback 10-30-2007 09:42 PM
The New Jersey Reefers Club - Where can you buy acrylic? This thread Refback 08-30-2007 02:48 PM
The New Jersey Reefers Club - WTB/WTS Black Eggcrate - Styrene Lighting Panel (NJ) This thread Refback 07-28-2007 06:27 PM
The New Jersey Reefers Club - WTB/WTS Black Eggcrate - Styrene Lighting Panel (NJ) This thread Refback 06-09-2007 07:58 PM
The New Jersey Reefers Club - WTB/WTS Black Eggcrate - Styrene Lighting Panel (NJ) This thread Refback 06-09-2007 02:46 PM
The New Jersey Reefers Club - Where can you buy acrylic? This thread Refback 06-07-2007 09:49 PM
WTB/WTS Black Eggcrate - Styrene Lighting Panel (NJ) This thread Refback 06-07-2007 05:00 PM
Where can you buy acrylic? This thread Refback 06-07-2007 12:49 PM
WTB/WTS Black Eggcrate - Styrene Lighting Panel (NJ) This thread Refback 06-07-2007 12:17 PM
The New Jersey Reefers Club - WTB/WTS Black Eggcrate - Styrene Lighting Panel (NJ) This thread Refback 06-07-2007 11:17 AM
Manhattan Reefs This thread Refback 03-20-2007 09:40 AM
Manhattan Reefs This thread Refback 03-06-2007 07:13 AM